[PATCH] 3c505 printk levels.

diff --git a/drivers/net/3c505.c b/drivers/net/3c505.c
index 3112d5deac88ab22179fdd46db8dcddac6ae0bc0..de4ebe6d650485706fcac50441a55e6386b34291 100644 (file)
--- a/drivers/net/3c505.c
+++ b/drivers/net/3c505.c
@@ -312,7 +312,7 @@ inline static void adapter_reset(struct net_device *dev)
 
        outb_control(orig_hcr, dev);
        if (!start_receive(dev, &adapter->tx_pcb))
-               printk("%s: start receive command failed \n", dev->name);
+               printk(KERN_ERR "%s: start receive command failed \n", dev->name);
 }
 
 /* Check to make sure that a DMA transfer hasn't timed out.  This should
@@ -324,7 +324,7 @@ static inline void check_3c505_dma(struct net_device *dev)
        elp_device *adapter = dev->priv;
        if (adapter->dmaing && time_after(jiffies, adapter->current_dma.start_time + 10)) {
                unsigned long flags, f;
-               printk("%s: DMA %s timed out, %d bytes left\n", dev->name, adapter->current_dma.direction ? "download" : "upload", get_dma_residue(dev->dma));
+               printk(KERN_ERR "%s: DMA %s timed out, %d bytes left\n", dev->name, adapter->current_dma.direction ? "download" : "upload", get_dma_residue(dev->dma));
                spin_lock_irqsave(&adapter->lock, flags);
                adapter->dmaing = 0;
                adapter->busy = 0;
@@ -460,7 +460,7 @@ static int send_pcb(struct net_device *dev, pcb_struct * pcb)
        }
 
        if (elp_debug >= 1)
-               printk("%s: timeout waiting for PCB acknowledge (status %02x)\n", dev->name, inb_status(dev->base_addr));
+               printk(KERN_DEBUG "%s: timeout waiting for PCB acknowledge (status %02x)\n", dev->name, inb_status(dev->base_addr));
 
       sti_abort:
        spin_unlock_irqrestore(&adapter->lock, flags);
@@ -509,7 +509,7 @@ static int receive_pcb(struct net_device *dev, pcb_struct * pcb)
        while (((stat = get_status(dev->base_addr)) & ACRF) == 0 && time_before(jiffies, timeout));
        if (time_after_eq(jiffies, timeout)) {
                TIMEOUT_MSG(__LINE__);
-               printk("%s: status %02x\n", dev->name, stat);
+               printk(KERN_INFO "%s: status %02x\n", dev->name, stat);
                return FALSE;
        }
        pcb->length = inb_command(dev->base_addr);
@@ -540,7 +540,7 @@ static int receive_pcb(struct net_device *dev, pcb_struct * pcb)
        /* safety check total length vs data length */
        if (total_length != (pcb->length + 2)) {
                if (elp_debug >= 2)
-                       printk("%s: mangled PCB received\n", dev->name);
+                       printk(KERN_WARNING "%s: mangled PCB received\n", dev->name);
                set_hsf(dev, HSF_PCB_NAK);
                return FALSE;
        }
@@ -549,7 +549,7 @@ static int receive_pcb(struct net_device *dev, pcb_struct * pcb)
                if (test_and_set_bit(0, (void *) &adapter->busy)) {
                        if (backlog_next(adapter->rx_backlog.in) == adapter->rx_backlog.out) {
                                set_hsf(dev, HSF_PCB_NAK);
-                               printk("%s: PCB rejected, transfer in progress and backlog full\n", dev->name);
+                               printk(KERN_WARNING "%s: PCB rejected, transfer in progress and backlog full\n", dev->name);
                                pcb->command = 0;
                                return TRUE;
                        } else {
@@ -574,7 +574,7 @@ static int start_receive(struct net_device *dev, pcb_struct * tx_pcb)
        elp_device *adapter = dev->priv;
 
        if (elp_debug >= 3)
-               printk("%s: restarting receiver\n", dev->name);
+               printk(KERN_DEBUG "%s: restarting receiver\n", dev->name);
        tx_pcb->command = CMD_RECEIVE_PACKET;
        tx_pcb->length = sizeof(struct Rcv_pkt);
        tx_pcb->data.rcv_pkt.buf_seg
@@ -626,7 +626,7 @@ static void receive_packet(struct net_device *dev, int len)
 
        /* if this happens, we die */
        if (test_and_set_bit(0, (void *) &adapter->dmaing))
-               printk("%s: rx blocked, DMA in progress, dir %d\n", dev->name, adapter->current_dma.direction);
+               printk(KERN_ERR "%s: rx blocked, DMA in progress, dir %d\n", dev->name, adapter->current_dma.direction);
 
        skb->dev = dev;
        adapter->current_dma.direction = 0;
@@ -646,7 +646,7 @@ static void receive_packet(struct net_device *dev, int len)
        release_dma_lock(flags);
 
        if (elp_debug >= 3) {
-               printk("%s: rx DMA transfer started\n", dev->name);
+               printk(KERN_DEBUG "%s: rx DMA transfer started\n", dev->name);
        }
 
        if (adapter->rx_active)
@@ -682,10 +682,10 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
                 */
                if (inb_status(dev->base_addr) & DONE) {
                        if (!adapter->dmaing) {
-                               printk("%s: phantom DMA completed\n", dev->name);
+                               printk(KERN_WARNING "%s: phantom DMA completed\n", dev->name);
                        }
                        if (elp_debug >= 3) {
-                               printk("%s: %s DMA complete, status %02x\n", dev->name, adapter->current_dma.direction ? "tx" : "rx", inb_status(dev->base_addr));
+                               printk(KERN_DEBUG "%s: %s DMA complete, status %02x\n", dev->name, adapter->current_dma.direction ? "tx" : "rx", inb_status(dev->base_addr));
                        }
 
                        outb_control(adapter->hcr_val & ~(DMAE | TCEN | DIR), dev);
@@ -709,7 +709,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
                                int t = adapter->rx_backlog.length[adapter->rx_backlog.out];
                                adapter->rx_backlog.out = backlog_next(adapter->rx_backlog.out);
                                if (elp_debug >= 2)
-                                       printk("%s: receiving backlogged packet (%d)\n", dev->name, t);
+                                       printk(KERN_DEBUG "%s: receiving backlogged packet (%d)\n", dev->name, t);
                                receive_packet(dev, t);
                        } else {
                                adapter->busy = 0;
@@ -743,18 +743,18 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
                                                printk(KERN_ERR "%s: interrupt - packet not received correctly\n", dev->name);
                                        } else {
                                                if (elp_debug >= 3) {
-                                                       printk("%s: interrupt - packet received of length %i (%i)\n", dev->name, len, dlen);
+                                                       printk(KERN_DEBUG "%s: interrupt - packet received of length %i (%i)\n", dev->name, len, dlen);
                                                }
                                                if (adapter->irx_pcb.command == 0xff) {
                                                        if (elp_debug >= 2)
-                                                               printk("%s: adding packet to backlog (len = %d)\n", dev->name, dlen);
+                                                               printk(KERN_DEBUG "%s: adding packet to backlog (len = %d)\n", dev->name, dlen);
                                                        adapter->rx_backlog.length[adapter->rx_backlog.in] = dlen;
                                                        adapter->rx_backlog.in = backlog_next(adapter->rx_backlog.in);
                                                } else {
                                                        receive_packet(dev, dlen);
                                                }
                                                if (elp_debug >= 3)
-                                                       printk("%s: packet received\n", dev->name);
+                                                       printk(KERN_DEBUG "%s: packet received\n", dev->name);
                                        }
                                        break;
 
@@ -764,7 +764,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
                                case CMD_CONFIGURE_82586_RESPONSE:
                                        adapter->got[CMD_CONFIGURE_82586] = 1;
                                        if (elp_debug >= 3)
-                                               printk("%s: interrupt - configure response received\n", dev->name);
+                                               printk(KERN_DEBUG "%s: interrupt - configure response received\n", dev->name);
                                        break;
 
                                        /*
@@ -773,7 +773,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
                                case CMD_CONFIGURE_ADAPTER_RESPONSE:
                                        adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 1;
                                        if (elp_debug >= 3)
-                                               printk("%s: Adapter memory configuration %s.\n", dev->name,
+                                               printk(KERN_DEBUG "%s: Adapter memory configuration %s.\n", dev->name,
                                                       adapter->irx_pcb.data.failed ? "failed" : "succeeded");
                                        break;
 
@@ -783,7 +783,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
                                case CMD_LOAD_MULTICAST_RESPONSE:
                                        adapter->got[CMD_LOAD_MULTICAST_LIST] = 1;
                                        if (elp_debug >= 3)
-                                               printk("%s: Multicast address list loading %s.\n", dev->name,
+                                               printk(KERN_DEBUG "%s: Multicast address list loading %s.\n", dev->name,
                                                       adapter->irx_pcb.data.failed ? "failed" : "succeeded");
                                        break;
 
@@ -793,7 +793,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
                                case CMD_SET_ADDRESS_RESPONSE:
                                        adapter->got[CMD_SET_STATION_ADDRESS] = 1;
                                        if (elp_debug >= 3)
-                                               printk("%s: Ethernet address setting %s.\n", dev->name,
+                                               printk(KERN_DEBUG "%s: Ethernet address setting %s.\n", dev->name,
                                                       adapter->irx_pcb.data.failed ? "failed" : "succeeded");
                                        break;
 
@@ -810,7 +810,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
                                        adapter->stats.rx_over_errors += adapter->irx_pcb.data.netstat.err_res;
                                        adapter->got[CMD_NETWORK_STATISTICS] = 1;
                                        if (elp_debug >= 3)
-                                               printk("%s: interrupt - statistics response received\n", dev->name);
+                                               printk(KERN_DEBUG "%s: interrupt - statistics response received\n", dev->name);
                                        break;
 
                                        /*
@@ -818,7 +818,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
                                         */
                                case CMD_TRANSMIT_PACKET_COMPLETE:
                                        if (elp_debug >= 3)
-                                               printk("%s: interrupt - packet sent\n", dev->name);
+                                               printk(KERN_DEBUG "%s: interrupt - packet sent\n", dev->name);
                                        if (!netif_running(dev))
                                                break;
                                        switch (adapter->irx_pcb.data.xmit_resp.c_stat) {
@@ -842,7 +842,7 @@ static irqreturn_t elp_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
                                        break;
                                }
                        } else {
-                               printk("%s: failed to read PCB on interrupt\n", dev->name);
+                               printk(KERN_WARNING "%s: failed to read PCB on interrupt\n", dev->name);
                                adapter_reset(dev);
                        }
                }
@@ -873,7 +873,7 @@ static int elp_open(struct net_device *dev)
        adapter = dev->priv;
 
        if (elp_debug >= 3)
-               printk("%s: request to open device\n", dev->name);
+               printk(KERN_DEBUG "%s: request to open device\n", dev->name);
 
        /*
         * make sure we actually found the device
@@ -946,7 +946,7 @@ static int elp_open(struct net_device *dev)
        adapter->tx_pcb.length = sizeof(struct Memconf);
        adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] = 0;
        if (!send_pcb(dev, &adapter->tx_pcb))
-               printk("%s: couldn't send memory configuration command\n", dev->name);
+               printk(KERN_ERR "%s: couldn't send memory configuration command\n", dev->name);
        else {
                unsigned long timeout = jiffies + TIMEOUT;
                while (adapter->got[CMD_CONFIGURE_ADAPTER_MEMORY] == 0 && time_before(jiffies, timeout));
@@ -959,13 +959,13 @@ static int elp_open(struct net_device *dev)
         * configure adapter to receive broadcast messages and wait for response
         */
        if (elp_debug >= 3)
-               printk("%s: sending 82586 configure command\n", dev->name);
+               printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name);
        adapter->tx_pcb.command = CMD_CONFIGURE_82586;
        adapter->tx_pcb.data.configure = NO_LOOPBACK | RECV_BROAD;
        adapter->tx_pcb.length = 2;
        adapter->got[CMD_CONFIGURE_82586] = 0;
        if (!send_pcb(dev, &adapter->tx_pcb))
-               printk("%s: couldn't send 82586 configure command\n", dev->name);
+               printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name);
        else {
                unsigned long timeout = jiffies + TIMEOUT;
                while (adapter->got[CMD_CONFIGURE_82586] == 0 && time_before(jiffies, timeout));
@@ -981,7 +981,7 @@ static int elp_open(struct net_device *dev)
         */
        prime_rx(dev);
        if (elp_debug >= 3)
-               printk("%s: %d receive PCBs active\n", dev->name, adapter->rx_active);
+               printk(KERN_DEBUG "%s: %d receive PCBs active\n", dev->name, adapter->rx_active);
 
        /*
         * device is now officially open!
@@ -1011,7 +1011,7 @@ static int send_packet(struct net_device *dev, struct sk_buff *skb)
 
        if (test_and_set_bit(0, (void *) &adapter->busy)) {
                if (elp_debug >= 2)
-                       printk("%s: transmit blocked\n", dev->name);
+                       printk(KERN_DEBUG "%s: transmit blocked\n", dev->name);
                return FALSE;
        }
 
@@ -1033,7 +1033,7 @@ static int send_packet(struct net_device *dev, struct sk_buff *skb)
        }
        /* if this happens, we die */
        if (test_and_set_bit(0, (void *) &adapter->dmaing))
-               printk("%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction);
+               printk(KERN_DEBUG "%s: tx: DMA %d in progress\n", dev->name, adapter->current_dma.direction);
 
        adapter->current_dma.direction = 1;
        adapter->current_dma.start_time = jiffies;
@@ -1059,7 +1059,7 @@ static int send_packet(struct net_device *dev, struct sk_buff *skb)
        release_dma_lock(flags);
        
        if (elp_debug >= 3)
-               printk("%s: DMA transfer started\n", dev->name);
+               printk(KERN_DEBUG "%s: DMA transfer started\n", dev->name);
 
        return TRUE;
 }
@@ -1076,7 +1076,7 @@ static void elp_timeout(struct net_device *dev)
        stat = inb_status(dev->base_addr);
        printk(KERN_WARNING "%s: transmit timed out, lost %s?\n", dev->name, (stat & ACRF) ? "interrupt" : "command");
        if (elp_debug >= 1)
-               printk("%s: status %#02x\n", dev->name, stat);
+               printk(KERN_DEBUG "%s: status %#02x\n", dev->name, stat);
        dev->trans_start = jiffies;
        adapter->stats.tx_dropped++;
        netif_wake_queue(dev);
@@ -1098,7 +1098,7 @@ static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
        check_3c505_dma(dev);
 
        if (elp_debug >= 3)
-               printk("%s: request to send packet of length %d\n", dev->name, (int) skb->len);
+               printk(KERN_DEBUG "%s: request to send packet of length %d\n", dev->name, (int) skb->len);
 
        netif_stop_queue(dev);
        
@@ -1107,13 +1107,13 @@ static int elp_start_xmit(struct sk_buff *skb, struct net_device *dev)
         */
        if (!send_packet(dev, skb)) {
                if (elp_debug >= 2) {
-                       printk("%s: failed to transmit packet\n", dev->name);
+                       printk(KERN_DEBUG "%s: failed to transmit packet\n", dev->name);
                }
                spin_unlock_irqrestore(&adapter->lock, flags);
                return 1;
        }
        if (elp_debug >= 3)
-               printk("%s: packet of length %d sent\n", dev->name, (int) skb->len);
+               printk(KERN_DEBUG "%s: packet of length %d sent\n", dev->name, (int) skb->len);
 
        /*
         * start the transmit timeout
@@ -1137,7 +1137,7 @@ static struct net_device_stats *elp_get_stats(struct net_device *dev)
        elp_device *adapter = (elp_device *) dev->priv;
 
        if (elp_debug >= 3)
-               printk("%s: request for stats\n", dev->name);
+               printk(KERN_DEBUG "%s: request for stats\n", dev->name);
 
        /* If the device is closed, just return the latest stats we have,
           - we cannot ask from the adapter without interrupts */
@@ -1149,7 +1149,7 @@ static struct net_device_stats *elp_get_stats(struct net_device *dev)
        adapter->tx_pcb.length = 0;
        adapter->got[CMD_NETWORK_STATISTICS] = 0;
        if (!send_pcb(dev, &adapter->tx_pcb))
-               printk("%s: couldn't send get statistics command\n", dev->name);
+               printk(KERN_ERR "%s: couldn't send get statistics command\n", dev->name);
        else {
                unsigned long timeout = jiffies + TIMEOUT;
                while (adapter->got[CMD_NETWORK_STATISTICS] == 0 && time_before(jiffies, timeout));
@@ -1257,7 +1257,7 @@ static int elp_close(struct net_device *dev)
        adapter = dev->priv;
 
        if (elp_debug >= 3)
-               printk("%s: request to close device\n", dev->name);
+               printk(KERN_DEBUG "%s: request to close device\n", dev->name);
 
        netif_stop_queue(dev);
 
@@ -1301,7 +1301,7 @@ static void elp_set_mc_list(struct net_device *dev)
        unsigned long flags;
 
        if (elp_debug >= 3)
-               printk("%s: request to set multicast list\n", dev->name);
+               printk(KERN_DEBUG "%s: request to set multicast list\n", dev->name);
 
        spin_lock_irqsave(&adapter->lock, flags);
        
@@ -1316,7 +1316,7 @@ static void elp_set_mc_list(struct net_device *dev)
                }
                adapter->got[CMD_LOAD_MULTICAST_LIST] = 0;
                if (!send_pcb(dev, &adapter->tx_pcb))
-                       printk("%s: couldn't send set_multicast command\n", dev->name);
+                       printk(KERN_ERR "%s: couldn't send set_multicast command\n", dev->name);
                else {
                        unsigned long timeout = jiffies + TIMEOUT;
                        while (adapter->got[CMD_LOAD_MULTICAST_LIST] == 0 && time_before(jiffies, timeout));
@@ -1335,14 +1335,14 @@ static void elp_set_mc_list(struct net_device *dev)
         * and wait for response
         */
        if (elp_debug >= 3)
-               printk("%s: sending 82586 configure command\n", dev->name);
+               printk(KERN_DEBUG "%s: sending 82586 configure command\n", dev->name);
        adapter->tx_pcb.command = CMD_CONFIGURE_82586;
        adapter->tx_pcb.length = 2;
        adapter->got[CMD_CONFIGURE_82586] = 0;
        if (!send_pcb(dev, &adapter->tx_pcb))
        {
                spin_unlock_irqrestore(&adapter->lock, flags);
-               printk("%s: couldn't send 82586 configure command\n", dev->name);
+               printk(KERN_ERR "%s: couldn't send 82586 configure command\n", dev->name);
        }
        else {
                unsigned long timeout = jiffies + TIMEOUT;
@@ -1524,9 +1524,9 @@ int __init elplus_probe(struct net_device *dev)
         */
        adapter = (elp_device *) (dev->priv = kmalloc(sizeof(elp_device), GFP_KERNEL));
        if (adapter == NULL) {
-               printk("%s: out of memory\n", dev->name);
+               printk(KERN_ERR "%s: out of memory\n", dev->name);
                return -ENODEV;
-        }
+       }
 
        adapter->send_pcb_semaphore = 0;
 
@@ -1549,7 +1549,7 @@ int __init elplus_probe(struct net_device *dev)
                        /* Nope, it's ignoring the command register.  This means that
                         * either it's still booting up, or it's died.
                         */
-                       printk("%s: command register wouldn't drain, ", dev->name);
+                       printk(KERN_ERR "%s: command register wouldn't drain, ", dev->name);
                        if ((inb_status(dev->base_addr) & 7) == 3) {
                                /* If the adapter status is 3, it *could* still be booting.
                                 * Give it the benefit of the doubt for 10 seconds.
@@ -1558,7 +1558,7 @@ int __init elplus_probe(struct net_device *dev)
                                timeout = jiffies + 10*HZ;
                                while (time_before(jiffies, timeout) && (inb_status(dev->base_addr) & 7));
                                if (inb_status(dev->base_addr) & 7) {
-                                       printk("%s: 3c505 failed to start\n", dev->name);
+                                       printk(KERN_ERR "%s: 3c505 failed to start\n", dev->name);
                                } else {
                                        okay = 1;  /* It started */
                                }
@@ -1579,18 +1579,18 @@ int __init elplus_probe(struct net_device *dev)
                        adapter->tx_pcb.length = 0;
                        cookie = probe_irq_on();
                        if (!send_pcb(dev, &adapter->tx_pcb)) {
-                               printk("%s: could not send first PCB\n", dev->name);
+                               printk(KERN_ERR "%s: could not send first PCB\n", dev->name);
                                probe_irq_off(cookie);
                                continue;
                        }
                        if (!receive_pcb(dev, &adapter->rx_pcb)) {
-                               printk("%s: could not read first PCB\n", dev->name);
+                               printk(KERN_ERR "%s: could not read first PCB\n", dev->name);
                                probe_irq_off(cookie);
                                continue;
                        }
                        if ((adapter->rx_pcb.command != CMD_ADDRESS_RESPONSE) ||
                            (adapter->rx_pcb.length != 6)) {
-                               printk("%s: first PCB wrong (%d, %d)\n", dev->name, adapter->rx_pcb.command, adapter->rx_pcb.length);
+                               printk(KERN_ERR "%s: first PCB wrong (%d, %d)\n", dev->name, adapter->rx_pcb.command, adapter->rx_pcb.length);
                                probe_irq_off(cookie);
                                continue;
                        }
@@ -1603,7 +1603,7 @@ int __init elplus_probe(struct net_device *dev)
                outb_control(adapter->hcr_val | FLSH | ATTN, dev);
                outb_control(adapter->hcr_val & ~(FLSH | ATTN), dev);
        }
-       printk("%s: failed to initialise 3c505\n", dev->name);
+       printk(KERN_ERR "%s: failed to initialise 3c505\n", dev->name);
        release_region(dev->base_addr, ELP_IO_EXTENT);
        return -ENODEV;
 
@@ -1611,21 +1611,21 @@ int __init elplus_probe(struct net_device *dev)
        if (dev->irq) {         /* Is there a preset IRQ? */
                int rpt = probe_irq_off(cookie);
                if (dev->irq != rpt) {
-                       printk("%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt);
+                       printk(KERN_WARNING "%s: warning, irq %d configured but %d detected\n", dev->name, dev->irq, rpt);
                }
                /* if dev->irq == probe_irq_off(cookie), all is well */
        } else                 /* No preset IRQ; just use what we can detect */
                dev->irq = probe_irq_off(cookie);
        switch (dev->irq) {    /* Legal, sane? */
        case 0:
-               printk("%s: IRQ probe failed: check 3c505 jumpers.\n",
+               printk(KERN_ERR "%s: IRQ probe failed: check 3c505 jumpers.\n",
                       dev->name);
                return -ENODEV;
        case 1:
        case 6:
        case 8:
        case 13:
-               printk("%s: Impossible IRQ %d reported by probe_irq_off().\n",
+               printk(KERN_ERR "%s: Impossible IRQ %d reported by probe_irq_off().\n",
                       dev->name, dev->irq);
                return -ENODEV;
        }
@@ -1655,7 +1655,7 @@ int __init elplus_probe(struct net_device *dev)
        /*
         * print remainder of startup message
         */
-       printk("%s: 3c505 at %#lx, irq %d, dma %d, ",
+       printk(KERN_INFO "%s: 3c505 at %#lx, irq %d, dma %d, ",
               dev->name, dev->base_addr, dev->irq, dev->dma);
        printk("addr %02x:%02x:%02x:%02x:%02x:%02x, ",
               dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
@@ -1690,10 +1690,10 @@ int __init elplus_probe(struct net_device *dev)
            !receive_pcb(dev, &adapter->rx_pcb) ||
            (adapter->rx_pcb.command != CMD_CONFIGURE_ADAPTER_RESPONSE) ||
            (adapter->rx_pcb.length != 2)) {
-               printk("%s: could not configure adapter memory\n", dev->name);
+               printk(KERN_ERR "%s: could not configure adapter memory\n", dev->name);
        }
        if (adapter->rx_pcb.data.configure) {
-               printk("%s: adapter configuration failed\n", dev->name);
+               printk(KERN_ERR "%s: adapter configuration failed\n", dev->name);
        }
 
        /*