/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
+ * the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
+ *
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* DEC socket DB9 DB25 Note
* 1 (GND) 5 7 -
- * 2 (RxD) 3 3 -
- * 3 (TxD) 2 2 -
+ * 2 (RxD) 2 3 -
+ * 3 (TxD) 3 2 -
* 4 (-12V) - - Somewhere from the PSU. At ATX, it's
- * the blue wire at pin 12 of the ATX
- * power connector. Please note that the
- * docs say this should be +12V! However,
- * I measured -12V...
- * 5 (+5V) - - PSU (red wire of ATX power connector
+ * the thin blue wire at pin 12 of the
+ * ATX power connector. Only required for
+ * VSXXX-AA/-GA mice.
+ * 5 (+5V) - - PSU (red wires of ATX power connector
* on pin 4, 6, 19 or 20) or HDD power
- * connector (also red wire)
- * 6 (not conn.) - - -
+ * connector (also red wire).
+ * 6 (+12V) - - HDD power connector, yellow wire. Only
+ * required for VSXXX-AB digitizer.
* 7 (dev. avail.) - - The mouse shorts this one to pin 1.
* This way, the host computer can detect
* the mouse. To use it with the adaptor,
* simply don't connect this pin.
*
* So to get a working adaptor, you need to connect the mouse with three
- * wires to a RS232 port and two additional wires for +5V and -12V to the
- * PSU.
+ * wires to a RS232 port and two or three additional wires for +5V, +12V and
+ * -12V to the PSU.
*
* Flow specification for the link is 4800, 8o1.
- */
-
-/*
- * TODO list:
- * - Automatically attach to a given serial port (no need for inputattach).
+ *
+ * The mice and tablet are described in "VCB02 Video Subsystem - Technical
+ * Manual", DEC EK-104AA-TM-001. You'll find it at MANX, a search engine
+ * specific for DEC documentation. Try
+ * http://www.vt100.net/manx/details?pn=EK-104AA-TM-001;id=21;cp=1
*/
#include <linux/delay.h>
unsigned char version;
unsigned char country;
unsigned char type;
+ char name[64];
char phys[32];
};
{
if (mouse->count == BUFLEN) {
printk (KERN_ERR "%s on %s: Dropping a byte of full buffer.\n",
- mouse->dev.name, mouse->dev.phys);
+ mouse->name, mouse->phys);
vsxxxaa_drop_bytes (mouse, 1);
}
+ DBG (KERN_INFO "Queueing byte 0x%02x\n", byte);
mouse->buf[mouse->count++] = byte;
}
static void
-vsxxxaa_report_mouse (struct vsxxxaa *mouse)
+vsxxxaa_detection_done (struct vsxxxaa *mouse)
{
- char *devtype;
-
switch (mouse->type) {
- case 0x02: devtype = "DEC mouse"; break;
- case 0x04: devtype = "DEC tablet"; break;
- default: devtype = "unknown DEC device"; break;
+ case 0x02:
+ sprintf (mouse->name, "DEC VSXXX-AA/GA mouse");
+ break;
+
+ case 0x04:
+ sprintf (mouse->name, "DEC VSXXX-AB digitizer");
+ break;
+
+ default:
+ sprintf (mouse->name, "unknown DEC pointer device");
+ break;
}
- printk (KERN_INFO "Found %s version 0x%x from country 0x%x "
- "on port %s\n", devtype, mouse->version,
- mouse->country, mouse->dev.phys);
+ printk (KERN_INFO "Found %s version 0x%02x from country 0x%02x "
+ "on port %s\n", mouse->name, mouse->version,
+ mouse->country, mouse->phys);
}
/*
* 0, bit 4 of byte 0 is direction.
*/
dx = buf[1] & 0x7f;
- dx *= ((buf[0] >> 4) & 0x01)? -1: 1;
+ dx *= ((buf[0] >> 4) & 0x01)? 1: -1;
/*
* Low 7 bit of byte 2 are abs(dy), bit 7 is
vsxxxaa_drop_bytes (mouse, 3);
DBG (KERN_INFO "%s on %s: dx=%d, dy=%d, buttons=%s%s%s\n",
- mouse->dev.name, mouse->dev.phys, dx, dy,
+ mouse->name, mouse->phys, dx, dy,
left? "L": "l", middle? "M": "m", right? "R": "r");
/*
input_report_key (dev, BTN_LEFT, left);
input_report_key (dev, BTN_MIDDLE, middle);
input_report_key (dev, BTN_RIGHT, right);
+ input_report_key (dev, BTN_TOUCH, 0);
input_report_rel (dev, REL_X, dx);
input_report_rel (dev, REL_Y, dy);
input_sync (dev);
{
struct input_dev *dev = &mouse->dev;
unsigned char *buf = mouse->buf;
- int left, middle, right, extra;
+ int left, middle, right, touch;
int x, y;
/*
*/
/*
- * Get X/Y position
+ * Get X/Y position. Y axis needs to be inverted since VSXXX-AB
+ * counts down->top while monitor counts top->bottom.
*/
x = ((buf[2] & 0x3f) << 6) | (buf[1] & 0x3f);
y = ((buf[4] & 0x3f) << 6) | (buf[3] & 0x3f);
+ y = 1023 - y;
/*
* Get button state. It's bits <4..1> of byte 0.
left = (buf[0] & 0x02)? 1: 0;
middle = (buf[0] & 0x04)? 1: 0;
right = (buf[0] & 0x08)? 1: 0;
- extra = (buf[0] & 0x10)? 1: 0;
+ touch = (buf[0] & 0x10)? 1: 0;
vsxxxaa_drop_bytes (mouse, 5);
DBG (KERN_INFO "%s on %s: x=%d, y=%d, buttons=%s%s%s%s\n",
- mouse->dev.name, mouse->dev.phys, x, y,
+ mouse->name, mouse->phys, x, y,
left? "L": "l", middle? "M": "m",
- right? "R": "r", extra? "E": "e");
+ right? "R": "r", touch? "T": "t");
/*
* Report what we've found so far...
input_report_key (dev, BTN_LEFT, left);
input_report_key (dev, BTN_MIDDLE, middle);
input_report_key (dev, BTN_RIGHT, right);
- input_report_key (dev, BTN_EXTRA, extra);
+ input_report_key (dev, BTN_TOUCH, touch);
input_report_abs (dev, ABS_X, x);
input_report_abs (dev, ABS_Y, y);
input_sync (dev);
mouse->version = buf[0] & 0x0f;
mouse->country = (buf[1] >> 4) & 0x07;
- mouse->type = buf[1] & 0x07;
+ mouse->type = buf[1] & 0x0f;
error = buf[2] & 0x7f;
/*
right = (buf[0] & 0x01)? 1: 0;
vsxxxaa_drop_bytes (mouse, 4);
- vsxxxaa_report_mouse (mouse);
+ vsxxxaa_detection_done (mouse);
if (error <= 0x1f) {
/* No error. Report buttons */
input_report_key (dev, BTN_LEFT, left);
input_report_key (dev, BTN_MIDDLE, middle);
input_report_key (dev, BTN_RIGHT, right);
+ input_report_key (dev, BTN_TOUCH, 0);
input_sync (dev);
} else {
printk (KERN_ERR "Your %s on %s reports an undefined error, "
- "please check it...\n", mouse->dev.name,
- mouse->dev.phys);
+ "please check it...\n", mouse->name,
+ mouse->phys);
}
/*
- * If the mouse was hot-plugged, we need to
- * force differential mode now...
+ * If the mouse was hot-plugged, we need to force differential mode
+ * now... However, give it a second to recover from it's reset.
*/
printk (KERN_NOTICE "%s on %s: Forceing standard packet format and "
- "streaming mode\n", mouse->dev.name, mouse->dev.phys);
+ "streaming mode\n", mouse->name, mouse->phys);
mouse->serio->write (mouse->serio, 'S');
+ mdelay (50);
mouse->serio->write (mouse->serio, 'R');
}
while (mouse->count > 0 && !IS_HDR_BYTE(buf[0])) {
printk (KERN_ERR "%s on %s: Dropping a byte to regain "
"sync with mouse data stream...\n",
- mouse->dev.name, mouse->dev.phys);
+ mouse->name, mouse->phys);
vsxxxaa_drop_bytes (mouse, 1);
}
if ((serio->type & SERIO_TYPE) != SERIO_RS232)
return;
-
if ((serio->type & SERIO_PROTO) != SERIO_VSXXXAA)
return;
init_input_dev (&mouse->dev);
set_bit (EV_KEY, mouse->dev.evbit); /* We have buttons */
- set_bit (EV_REL, mouse->dev.evbit); /* We can move */
+ set_bit (EV_REL, mouse->dev.evbit);
+ set_bit (EV_ABS, mouse->dev.evbit);
set_bit (BTN_LEFT, mouse->dev.keybit); /* We have 3 buttons */
set_bit (BTN_MIDDLE, mouse->dev.keybit);
set_bit (BTN_RIGHT, mouse->dev.keybit);
- set_bit (BTN_EXTRA, mouse->dev.keybit); /* ...and Tablet */
- set_bit (REL_X, mouse->dev.relbit); /* We can move in */
- set_bit (REL_Y, mouse->dev.relbit); /* two dimensions */
- set_bit (ABS_X, mouse->dev.absbit); /* DEC tablet support */
+ set_bit (BTN_TOUCH, mouse->dev.keybit); /* ...and Tablet */
+ set_bit (REL_X, mouse->dev.relbit);
+ set_bit (REL_Y, mouse->dev.relbit);
+ set_bit (ABS_X, mouse->dev.absbit);
set_bit (ABS_Y, mouse->dev.absbit);
mouse->dev.absmin[ABS_X] = 0;
mouse->dev.private = mouse;
serio->private = mouse;
+ sprintf (mouse->name, "DEC VSXXX-AA/GA mouse or VSXXX-AB digitizer");
sprintf (mouse->phys, "%s/input0", serio->phys);
+ mouse->dev.name = mouse->name;
mouse->dev.phys = mouse->phys;
- mouse->dev.name = "DEC VSXXX-AA/GA mouse or DEC tablet";
mouse->dev.id.bustype = BUS_RS232;
mouse->serio = serio;
}
/*
- * Request selftest and differential stream mode.
+ * Request selftest. Standard packet format and differential
+ * mode will be requested after the device ID'ed successfully.
*/
mouse->serio->write (mouse->serio, 'T'); /* Test */
- mouse->serio->write (mouse->serio, 'R'); /* Differential stream */
input_register_device (&mouse->dev);
- printk (KERN_INFO "input: %s on %s\n", mouse->dev.name, serio->phys);
+ printk (KERN_INFO "input: %s on %s\n", mouse->name, mouse->phys);
}
static struct serio_dev vsxxxaa_dev = {
- .interrupt = vsxxxaa_interrupt,
- .connect = vsxxxaa_connect,
- .disconnect = vsxxxaa_disconnect
+ .connect = vsxxxaa_connect,
+ .interrupt = vsxxxaa_interrupt,
+ .disconnect = vsxxxaa_disconnect,
};
int __init
projects / history.git / commitdiff