They are only included from these drivers.
While at it:
- remove redundant ide_pci_device_t tables
- add DECLARE_CS_DEV() (cs5520)
- remove duplicate DISPLAY_SC1200_TIMINGS define (sc1200)
- remove unused SIIMAGE_BUFFERED_TASKFILE, SII_DEBUG
and siiprintk() defines + add DECLARE_SII_DEV() (siimage)
- remove unused SLC90E66_DEBUG_DRIVE_INFO define (slc90e66)
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
#include <asm/io.h>
-#include "alim15x3.h"
+#define DISPLAY_ALI_TIMINGS
/*
* ALi devices are not plug in. Otherwise these static values would
ide_setup_dma(hwif, dmabase, 8);
}
+static ide_pci_device_t ali15x3_chipset __devinitdata = {
+ .name = "ALI15X3",
+ .init_chipset = init_chipset_ali15x3,
+ .init_hwif = init_hwif_ali15x3,
+ .init_dma = init_dma_ali15x3,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = ON_BOARD,
+};
+
/**
* alim15x3_init_one - set up an ALi15x3 IDE controller
* @dev: PCI device to set up
static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_pci_device_t *d = &ali15x3_chipsets[id->driver_data];
-
+ ide_pci_device_t *d = &ali15x3_chipset;
+
if(pci_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, NULL))
printk(KERN_ERR "Warning: ATI Radeon IGP Northbridge is not yet fully tested.\n");
+++ /dev/null
-#ifndef ALI15X3_H
-#define ALI15X3_H
-
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#define DISPLAY_ALI_TIMINGS
-
-static unsigned int init_chipset_ali15x3(struct pci_dev *, const char *);
-static void init_hwif_common_ali15x3(ide_hwif_t *);
-static void init_hwif_ali15x3(ide_hwif_t *);
-static void init_dma_ali15x3(ide_hwif_t *, unsigned long);
-
-static ide_pci_device_t ali15x3_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "ALI15X3",
- .init_chipset = init_chipset_ali15x3,
- .init_hwif = init_hwif_ali15x3,
- .init_dma = init_dma_ali15x3,
- .channels = 2,
- .autodma = AUTODMA,
- .bootable = ON_BOARD,
- }
-};
-
-#endif /* ALI15X3 */
#include <asm/io.h>
#include <asm/irq.h>
-#include "cs5520.h"
+#define DISPLAY_CS5520_TIMINGS
#if defined(DISPLAY_CS5520_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
hwif->drives[0].autodma = hwif->autodma;
hwif->drives[1].autodma = hwif->autodma;
}
-
+
+#define DECLARE_CS_DEV(name_str) \
+ { \
+ .name = name_str, \
+ .init_chipset = init_chipset_cs5520, \
+ .init_setup_dma = cs5520_init_setup_dma, \
+ .init_hwif = init_hwif_cs5520, \
+ .channels = 2, \
+ .autodma = AUTODMA, \
+ .bootable = ON_BOARD, \
+ .flags = IDEPCI_FLAG_ISA_PORTS, \
+ }
+
+static ide_pci_device_t cyrix_chipsets[] __devinitdata = {
+ /* 0 */ DECLARE_CS_DEV("Cyrix 5510"),
+ /* 1 */ DECLARE_CS_DEV("Cyrix 5520")
+};
+
/*
* The 5510/5520 are a bit weird. They don't quite set up the way
* the PCI helper layer expects so we must do much of the set up
+++ /dev/null
-#ifndef CS5520_H
-#define CS5520_H
-
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#define DISPLAY_CS5520_TIMINGS
-
-static unsigned int init_chipset_cs5520(struct pci_dev *, const char *);
-static void init_hwif_cs5520(ide_hwif_t *);
-static void cs5520_init_setup_dma(struct pci_dev *dev, struct ide_pci_device_s *d, ide_hwif_t *hwif);
-
-static ide_pci_device_t cyrix_chipsets[] __devinitdata = {
- {
- .name = "Cyrix 5510",
- .init_chipset = init_chipset_cs5520,
- .init_setup_dma = cs5520_init_setup_dma,
- .init_hwif = init_hwif_cs5520,
- .channels = 2,
- .autodma = AUTODMA,
- .bootable = ON_BOARD,
- .flags = IDEPCI_FLAG_ISA_PORTS,
- },
- {
- .name = "Cyrix 5520",
- .init_chipset = init_chipset_cs5520,
- .init_setup_dma = cs5520_init_setup_dma,
- .init_hwif = init_hwif_cs5520,
- .channels = 2,
- .autodma = AUTODMA,
- .bootable = ON_BOARD,
- .flags = IDEPCI_FLAG_ISA_PORTS,
- }
-};
-
-
-#endif /* CS5520_H */
-
-
#include <asm/io.h>
#include <asm/irq.h>
-#include "cs5530.h"
+#define DISPLAY_CS5530_TIMINGS
#if defined(DISPLAY_CS5530_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
hwif->drives[1].autodma = hwif->autodma;
}
+static ide_pci_device_t cs5530_chipset __devinitdata = {
+ .name = "CS5530",
+ .init_chipset = init_chipset_cs5530,
+ .init_hwif = init_hwif_cs5530,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = ON_BOARD,
+ .flags = IDEPCI_FLAG_FORCE_MASTER,
+};
+
static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &cs5530_chipsets[id->driver_data]);
+ ide_setup_pci_device(dev, &cs5530_chipset);
return 0;
}
+++ /dev/null
-#ifndef CS5530_H
-#define CS5530_H
-
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#define DISPLAY_CS5530_TIMINGS
-
-static unsigned int init_chipset_cs5530(struct pci_dev *, const char *);
-static void init_hwif_cs5530(ide_hwif_t *);
-
-static ide_pci_device_t cs5530_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "CS5530",
- .init_chipset = init_chipset_cs5530,
- .init_hwif = init_hwif_cs5530,
- .channels = 2,
- .autodma = AUTODMA,
- .bootable = ON_BOARD,
- .flags = IDEPCI_FLAG_FORCE_MASTER,
- }
-};
-
-#endif /* CS5530_H */
#include <asm/io.h>
-#include "ns87415.h"
-
static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
/*
hwif->drives[1].autodma = hwif->autodma;
}
+static ide_pci_device_t ns87415_chipset __devinitdata = {
+ .name = "NS87415",
+ .init_hwif = init_hwif_ns87415,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = ON_BOARD,
+};
+
static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &ns87415_chipsets[id->driver_data]);
+ ide_setup_pci_device(dev, &ns87415_chipset);
return 0;
}
+++ /dev/null
-#ifndef NS87415_H
-#define NS87415_H
-
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-static void init_hwif_ns87415(ide_hwif_t *);
-
-static ide_pci_device_t ns87415_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "NS87415",
- .init_hwif = init_hwif_ns87415,
- .channels = 2,
- .autodma = AUTODMA,
- .bootable = ON_BOARD,
- }
-};
-
-#endif /* NS87415_H */
#include <asm/io.h>
-#include "rz1000.h"
-
static void __init init_hwif_rz1000 (ide_hwif_t *hwif)
{
u16 reg;
}
}
+static ide_pci_device_t rz1000_chipset __devinitdata = {
+ .name = "RZ100x",
+ .init_hwif = init_hwif_rz1000,
+ .channels = 2,
+ .autodma = NODMA,
+ .bootable = ON_BOARD,
+};
+
static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &rz1000_chipsets[id->driver_data]);
+ ide_setup_pci_device(dev, &rz1000_chipset);
return 0;
}
static struct pci_device_id rz1000_pci_tbl[] = {
{ PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+ { PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, rz1000_pci_tbl);
+++ /dev/null
-#ifndef RZ100X_H
-#define RZ100X_H
-
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-static void init_hwif_rz1000(ide_hwif_t *);
-
-static ide_pci_device_t rz1000_chipsets[] __devinitdata = {
- {
- .name = "RZ1000",
- .init_hwif = init_hwif_rz1000,
- .channels = 2,
- .autodma = NODMA,
- .bootable = ON_BOARD,
- },{
- .name = "RZ1001",
- .init_hwif = init_hwif_rz1000,
- .channels = 2,
- .autodma = NODMA,
- .bootable = ON_BOARD,
- }
-};
-
-#endif /* RZ100X_H */
#include <asm/io.h>
#include <asm/irq.h>
-#include "sc1200.h"
-
#define SC1200_REV_A 0x00
#define SC1200_REV_B1 0x01
#define SC1200_REV_B3 0x02
hwif->drives[1].autodma = hwif->autodma;
}
+static ide_pci_device_t sc1200_chipset __devinitdata = {
+ .name = "SC1200",
+ .init_chipset = init_chipset_sc1200,
+ .init_hwif = init_hwif_sc1200,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .bootable = ON_BOARD,
+};
+
static int __devinit sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &sc1200_chipsets[id->driver_data]);
+ ide_setup_pci_device(dev, &sc1200_chipset);
return 0;
}
+++ /dev/null
-#ifndef SC1200_H
-#define SC1200_H
-
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#define DISPLAY_SC1200_TIMINGS
-
-static unsigned int init_chipset_sc1200(struct pci_dev *, const char *);
-static void init_hwif_sc1200(ide_hwif_t *);
-
-static ide_pci_device_t sc1200_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "SC1200",
- .init_chipset = init_chipset_sc1200,
- .init_hwif = init_hwif_sc1200,
- .channels = 2,
- .autodma = AUTODMA,
- .bootable = ON_BOARD,
- }
-};
-
-#endif /* SC1200_H */
#include <asm/io.h>
-#include "siimage.h"
+#undef SIIMAGE_VIRTUAL_DMAPIO
+#undef SIIMAGE_LARGE_DMA
/**
* pdev_is_sata - check if device is SATA
hwif->drives[1].autodma = hwif->autodma;
}
+#define DECLARE_SII_DEV(name_str) \
+ { \
+ .name = name_str, \
+ .init_chipset = init_chipset_siimage, \
+ .init_iops = init_iops_siimage, \
+ .init_hwif = init_hwif_siimage, \
+ .channels = 2, \
+ .autodma = AUTODMA, \
+ .bootable = ON_BOARD, \
+ }
+
+static ide_pci_device_t siimage_chipsets[] __devinitdata = {
+ /* 0 */ DECLARE_SII_DEV("SiI680"),
+ /* 1 */ DECLARE_SII_DEV("SiI3112 Serial ATA"),
+ /* 2 */ DECLARE_SII_DEV("Adaptec AAR-1210SA")
+};
+
/**
* siimage_init_one - pci layer discovery entry
* @dev: PCI device
+++ /dev/null
-#ifndef SIIMAGE_H
-#define SIIMAGE_H
-
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-
-#undef SIIMAGE_VIRTUAL_DMAPIO
-#undef SIIMAGE_BUFFERED_TASKFILE
-#undef SIIMAGE_LARGE_DMA
-
-#define SII_DEBUG 0
-
-#if SII_DEBUG
-#define siiprintk(x...) printk(x)
-#else
-#define siiprintk(x...)
-#endif
-
-static unsigned int init_chipset_siimage(struct pci_dev *, const char *);
-static void init_iops_siimage(ide_hwif_t *);
-static void init_hwif_siimage(ide_hwif_t *);
-
-static ide_pci_device_t siimage_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "SiI680",
- .init_chipset = init_chipset_siimage,
- .init_iops = init_iops_siimage,
- .init_hwif = init_hwif_siimage,
- .channels = 2,
- .autodma = AUTODMA,
- .bootable = ON_BOARD,
- },{ /* 1 */
- .name = "SiI3112 Serial ATA",
- .init_chipset = init_chipset_siimage,
- .init_iops = init_iops_siimage,
- .init_hwif = init_hwif_siimage,
- .channels = 2,
- .autodma = AUTODMA,
- .bootable = ON_BOARD,
- },{ /* 2 */
- .name = "Adaptec AAR-1210SA",
- .init_chipset = init_chipset_siimage,
- .init_iops = init_iops_siimage,
- .init_hwif = init_hwif_siimage,
- .channels = 2,
- .autodma = AUTODMA,
- .bootable = ON_BOARD,
- }
-};
-
-#endif /* SIIMAGE_H */
#include <asm/irq.h>
#include "ide-timing.h"
-#include "sis5513.h"
+
+#define DISPLAY_SIS_TIMINGS
/* registers layout and init values are chipset family dependant */
return;
}
+static ide_pci_device_t sis5513_chipset __devinitdata = {
+ .name = "SIS5513",
+ .init_chipset = init_chipset_sis5513,
+ .init_hwif = init_hwif_sis5513,
+ .channels = 2,
+ .autodma = NOAUTODMA,
+ .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
+ .bootable = ON_BOARD,
+};
+
static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &sis5513_chipsets[id->driver_data]);
+ ide_setup_pci_device(dev, &sis5513_chipset);
return 0;
}
+++ /dev/null
-#ifndef SIS5513_H
-#define SIS5513_H
-
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#define DISPLAY_SIS_TIMINGS
-
-static unsigned int init_chipset_sis5513(struct pci_dev *, const char *);
-static void init_hwif_sis5513(ide_hwif_t *);
-
-static ide_pci_device_t sis5513_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "SIS5513",
- .init_chipset = init_chipset_sis5513,
- .init_hwif = init_hwif_sis5513,
- .channels = 2,
- .autodma = NOAUTODMA,
- .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
- .bootable = ON_BOARD,
- }
-};
-
-#endif /* SIS5513_H */
#include <asm/io.h>
#include <asm/dma.h>
-#include "sl82c105.h"
-
#undef DEBUG
#ifdef DEBUG
#endif /* CONFIG_BLK_DEV_IDEDMA */
}
+static ide_pci_device_t sl82c105_chipset __devinitdata = {
+ .name = "W82C105",
+ .init_chipset = init_chipset_sl82c105,
+ .init_hwif = init_hwif_sl82c105,
+ .init_dma = init_dma_sl82c105,
+ .channels = 2,
+ .autodma = NOAUTODMA,
+ .enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
+ .bootable = ON_BOARD,
+};
+
static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &sl82c105_chipsets[id->driver_data]);
+ ide_setup_pci_device(dev, &sl82c105_chipset);
return 0;
}
+++ /dev/null
-#ifndef W82C105_H
-#define W82C105_H
-
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-static unsigned int init_chipset_sl82c105(struct pci_dev *, const char *);
-static void init_hwif_sl82c105(ide_hwif_t *);
-static void init_dma_sl82c105(ide_hwif_t *, unsigned long);
-
-static ide_pci_device_t sl82c105_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "W82C105",
- .init_chipset = init_chipset_sl82c105,
- .init_hwif = init_hwif_sl82c105,
- .init_dma = init_dma_sl82c105,
- .channels = 2,
- .autodma = NOAUTODMA,
- .enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
- .bootable = ON_BOARD,
- }
-};
-
-#endif /* W82C105_H */
#include <asm/io.h>
-#include "slc90e66.h"
+#define DISPLAY_SLC90E66_TIMINGS
#if defined(DISPLAY_SLC90E66_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#endif /* !CONFIG_BLK_DEV_IDEDMA */
}
+static ide_pci_device_t slc90e66_chipset __devinitdata = {
+ .name = "SLC90E66",
+ .init_chipset = init_chipset_slc90e66,
+ .init_hwif = init_hwif_slc90e66,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}},
+ .bootable = ON_BOARD,
+};
+
static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &slc90e66_chipsets[id->driver_data]);
+ ide_setup_pci_device(dev, &slc90e66_chipset);
return 0;
}
+++ /dev/null
-#ifndef SLC90E66_H
-#define SLC90E66_H
-
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#define DISPLAY_SLC90E66_TIMINGS
-
-#define SLC90E66_DEBUG_DRIVE_INFO 0
-
-static unsigned int init_chipset_slc90e66(struct pci_dev *, const char *);
-static void init_hwif_slc90e66(ide_hwif_t *);
-
-static ide_pci_device_t slc90e66_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "SLC90E66",
- .init_chipset = init_chipset_slc90e66,
- .init_hwif = init_hwif_slc90e66,
- .channels = 2,
- .autodma = AUTODMA,
- .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}},
- .bootable = ON_BOARD,
- }
-};
-
-#endif /* SLC90E66_H */
#include <linux/ide.h>
#include <linux/init.h>
-#include "triflex.h"
-
static struct pci_dev *triflex_dev;
#ifdef CONFIG_PROC_FS
return 0;
}
+static ide_pci_device_t triflex_device __devinitdata = {
+ .name = "TRIFLEX",
+ .init_chipset = init_chipset_triflex,
+ .init_hwif = init_hwif_triflex,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}},
+ .bootable = ON_BOARD,
+};
+
static int __devinit triflex_init_one(struct pci_dev *dev,
const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &triflex_devices[id->driver_data]);
+ ide_setup_pci_device(dev, &triflex_device);
triflex_dev = dev;
return 0;
}
+static struct pci_device_id triflex_pci_tbl[] = {
+ { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
+
static struct pci_driver driver = {
.name = "TRIFLEX IDE",
.id_table = triflex_pci_tbl,
+++ /dev/null
-/*
- * triflex.h
- *
- * Copyright (C) 2002 Hewlett-Packard Development Group, L.P.
- * Author: Torben Mathiasen <torben.mathiasen@hp.com>
- *
- */
-#ifndef TRIFLEX_H
-#define TRIFLEX_H
-
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-static unsigned int __devinit init_chipset_triflex(struct pci_dev *, const char *);
-static void init_hwif_triflex(ide_hwif_t *);
-
-static ide_pci_device_t triflex_devices[] __devinitdata = {
- {
- .name = "TRIFLEX",
- .init_chipset = init_chipset_triflex,
- .init_hwif = init_hwif_triflex,
- .channels = 2,
- .autodma = AUTODMA,
- .enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}},
- .bootable = ON_BOARD,
- }
-};
-
-static struct pci_device_id triflex_pci_tbl[] = {
- { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE, PCI_ANY_ID,
- PCI_ANY_ID, 0, 0, 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
-
-#endif /* TRIFLEX_H */
#include <asm/io.h>
-#include "trm290.h"
-
static void trm290_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
{
ide_hwif_t *hwif = HWIF(drive);
#endif
}
+static ide_pci_device_t trm290_chipset __devinitdata = {
+ .name = "TRM290",
+ .init_hwif = init_hwif_trm290,
+ .channels = 2,
+ .autodma = NOAUTODMA,
+ .bootable = ON_BOARD,
+};
+
static int __devinit trm290_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &trm290_chipsets[id->driver_data]);
+ ide_setup_pci_device(dev, &trm290_chipset);
return 0;
}
+++ /dev/null
-#ifndef TRM290_H
-#define TRM290_H
-
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-extern void init_hwif_trm290(ide_hwif_t *);
-
-static ide_pci_device_t trm290_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "TRM290",
- .init_hwif = init_hwif_trm290,
- .channels = 2,
- .autodma = NOAUTODMA,
- .bootable = ON_BOARD,
- }
-};
-
-#endif /* TRM290_H */
#include <asm/io.h>
#include "ide-timing.h"
-#include "via82cxxx.h"
+
+#define DISPLAY_VIA_TIMINGS
#define VIA_IDE_ENABLE 0x40
#define VIA_IDE_CONFIG 0x41
hwif->drives[1].autodma = hwif->autodma;
}
+static ide_pci_device_t via82cxxx_chipset __devinitdata = {
+ .name = "VP_IDE",
+ .init_chipset = init_chipset_via82cxxx,
+ .init_hwif = init_hwif_via82cxxx,
+ .channels = 2,
+ .autodma = NOAUTODMA,
+ .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}},
+ .bootable = ON_BOARD,
+};
+
static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &via82cxxx_chipsets[id->driver_data]);
+ ide_setup_pci_device(dev, &via82cxxx_chipset);
return 0;
}
+++ /dev/null
-#ifndef VIA82CXXX_H
-#define VIA82CXXX_H
-
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#define DISPLAY_VIA_TIMINGS
-
-static unsigned int init_chipset_via82cxxx(struct pci_dev *, const char *);
-static void init_hwif_via82cxxx(ide_hwif_t *);
-
-static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "VP_IDE",
- .init_chipset = init_chipset_via82cxxx,
- .init_hwif = init_hwif_via82cxxx,
- .channels = 2,
- .autodma = NOAUTODMA,
- .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}},
- .bootable = ON_BOARD,
- }
-};
-
-#endif /* VIA82CXXX_H */
projects / history.git / commitdiff