tristate "Macintosh serial support"
depends on MAC
-config ADB
- bool "Apple Desktop Bus (ADB) support"
- depends on MAC
- help
- Apple Desktop Bus (ADB) support is for support of devices which
- are connected to an ADB port. ADB devices tend to have 4 pins.
- If you have an Apple Macintosh prior to the iMac, or a
- "Blue and White G3", you probably want to say Y here. Otherwise
- say N.
-
-config ADB_MACII
- bool "Include Mac II ADB driver"
- depends on ADB
- help
- Say Y here if want your kernel to support Macintosh systems that use
- the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci,
- Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
- Centris 650.
-
-config ADB_MACIISI
- bool "Include Mac IIsi ADB driver"
- depends on ADB
- help
- Say Y here if want your kernel to support Macintosh systems that use
- the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic
- II, LC, LC II, LC III, Performa 460, and the Performa 600.
-
-config ADB_CUDA
- bool "Include CUDA ADB driver"
- depends on ADB
- help
- This provides support for CUDA based Power Macintosh systems. This
- includes most OldWorld PowerMacs, the first generation iMacs, the
- Blue&White G3 and the Yikes G4 (PCI Graphics). All later models
- should use CONFIG_ADB_PMU instead.
-
- If unsure say Y.
-
-config ADB_IOP
- bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
- depends on ADB
- help
- The I/O Processor (IOP) is an Apple custom IC designed to provide
- intelligent support for I/O controllers. It is described at
- <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
- support for it, say 'Y' here.
-
-config ADB_PMU68K
- bool "Include PMU (Powerbook) ADB driver"
- depends on ADB
- help
- Say Y here if want your kernel to support the m68k based Powerbooks.
- This includes the PowerBook 140, PowerBook 145, PowerBook 150,
- PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
- PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
- PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
- PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
-
-config INPUT_ADBHID
- bool "Use input layer for ADB devices"
- depends on MAC && INPUT=y
- ---help---
- Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
- such as keyboards, mice, joysticks, or graphic tablets handled by
- the input layer. If you say Y here, make sure to say Y to the
- corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
- "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
- support" (CONFIG_INPUT_EVDEV) as well.
-
- If you say N here, you still have the option of using the old ADB
- keyboard and mouse drivers.
-
- If unsure, say Y.
-
config MAC_HID
bool
depends on INPUT_ADBHID
If unsure, say Y here.
-config MAC_EMUMOUSEBTN
- bool "Support for mouse button 2+3 emulation"
- depends on INPUT_ADBHID
- help
- This provides generic support for emulating the 2nd and 3rd mouse
- button with keypresses. If you say Y here, the emulation is still
- disabled by default. The emulation is controlled by these sysctl
- entries:
- /proc/sys/dev/mac_hid/mouse_button_emulation
- /proc/sys/dev/mac_hid/mouse_button2_keycode
- /proc/sys/dev/mac_hid/mouse_button3_keycode
-
config ADB_KEYBOARD
bool "Support for ADB keyboard (old driver)"
depends on MAC && !INPUT_ADBHID
menu "Macintosh device drivers"
+config ADB
+ bool "Apple Desktop Bus (ADB) support"
+ depends on MAC || PPC_PMAC
+ help
+ Apple Desktop Bus (ADB) support is for support of devices which
+ are connected to an ADB port. ADB devices tend to have 4 pins.
+ If you have an Apple Macintosh prior to the iMac, an iBook or
+ PowerBook, or a "Blue and White G3", you probably want to say Y
+ here. Otherwise say N.
+
+config ADB_MACII
+ bool "Include Mac II ADB driver"
+ depends on ADB && MAC
+ help
+ Say Y here if want your kernel to support Macintosh systems that use
+ the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci,
+ Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
+ Centris 650.
+
+config ADB_MACIISI
+ bool "Include Mac IIsi ADB driver"
+ depends on ADB && MAC
+ help
+ Say Y here if want your kernel to support Macintosh systems that use
+ the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic
+ II, LC, LC II, LC III, Performa 460, and the Performa 600.
+
+config ADB_IOP
+ bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
+ depends on ADB && MAC
+ help
+ The I/O Processor (IOP) is an Apple custom IC designed to provide
+ intelligent support for I/O controllers. It is described at
+ <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
+ support for it, say 'Y' here.
+
+config ADB_PMU68K
+ bool "Include PMU (Powerbook) ADB driver"
+ depends on ADB && MAC
+ help
+ Say Y here if want your kernel to support the m68k based Powerbooks.
+ This includes the PowerBook 140, PowerBook 145, PowerBook 150,
+ PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
+ PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
+ PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
+ PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
+
# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
config ADB_CUDA
- bool "Support for CUDA based PowerMacs"
- depends on PPC_PMAC && !PPC_PMAC64
+ bool "Support for CUDA based Macs and PowerMacs"
+ depends on (ADB || PPC_PMAC) && !PPC_PMAC64
help
- This provides support for CUDA based Power Macintosh systems. This
- includes most OldWorld PowerMacs, the first generation iMacs, the
- Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later models
- should use CONFIG_ADB_PMU instead. It is safe to say Y here even if
- your machine doesn't have a CUDA.
+ This provides support for CUDA based Macintosh and Power Macintosh
+ systems. This includes many m68k based Macs (Color Classic, Mac TV,
+ Performa 475, Performa 520, Performa 550, Performa 575,
+ Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and
+ Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs,
+ the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later
+ models should use CONFIG_ADB_PMU instead. It is safe to say Y here
+ even if your machine doesn't have a CUDA.
If unsure say Y.
This driver is obsolete. Use CONFIG_SERIAL_PMACZILOG in
"Character devices --> Serial drivers --> PowerMac z85c30" option.
-config ADB
- bool "Apple Desktop Bus (ADB) support"
- depends on PPC_PMAC
- help
- Apple Desktop Bus (ADB) support is for support of devices which
- are connected to an ADB port. ADB devices tend to have 4 pins.
- If you have an Apple Macintosh prior to the iMac, an iBook or
- PowerBook, or a "Blue and White G3", you probably want to say Y
- here. Otherwise say N.
-
config ADB_MACIO
bool "Include MacIO (CHRP) ADB driver"
- depends on ADB && PPC_PMAC && !PPC_PMAC64
+ depends on ADB && PPC_CHRP && !PPC_PMAC64
help
Say Y here to include direct support for the ADB controller in the
Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra
config ANSLCD
bool "Support for ANS LCD display"
- depends on ADB_CUDA
+ depends on ADB_CUDA && PPC_PMAC
endmenu
projects / history.git / commitdiff