]> git.neil.brown.name Git - history.git/commitdiff
input: Remove include/linux/pc_keyb.h and old PS/2 code
authorJames Simmons <jsimmons@maxwell.earthlink.net>
Wed, 12 Feb 2003 11:28:17 +0000 (12:28 +0100)
committerJames Simmons <jsimmons@maxwell.earthlink.net>
Wed, 12 Feb 2003 11:28:17 +0000 (12:28 +0100)
from drivers/char/misc.c

drivers/char/misc.c
include/linux/pc_keyb.h [deleted file]

index 88ac6704ccc60a2b10dc7516b0d4df0597b5eeae..370d61c1c6adfa587860aa9df8f701e6f7a60571 100644 (file)
@@ -50,8 +50,6 @@
 #include <linux/tty.h>
 #include <linux/kmod.h>
 
-#include "busmouse.h"
-
 /*
  * Head entry for the doubly linked miscdevice list
  */
@@ -64,7 +62,6 @@ static DECLARE_MUTEX(misc_sem);
 #define DYNAMIC_MINORS 64 /* like dynamic majors */
 static unsigned char misc_minors[DYNAMIC_MINORS / 8];
 
-extern int psaux_init(void);
 #ifdef CONFIG_SGI_NEWPORT_GFX
 extern void gfx_register(void);
 #endif
diff --git a/include/linux/pc_keyb.h b/include/linux/pc_keyb.h
deleted file mode 100644 (file)
index 22e0098..0000000
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- *     include/linux/pc_keyb.h
- *
- *     PC Keyboard And Keyboard Controller
- *
- *     (c) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
- */
-
-/*
- *     Configuration Switches
- */
-
-#undef KBD_REPORT_ERR                  /* Report keyboard errors */
-#define KBD_REPORT_UNKN                        /* Report unknown scan codes */
-#define KBD_REPORT_TIMEOUTS            /* Report keyboard timeouts */
-#undef KBD_IS_FOCUS_9000               /* We have the brain-damaged FOCUS-9000 keyboard */
-#undef INITIALIZE_MOUSE                        /* Define if your PS/2 mouse needs initialization. */
-
-
-
-#define KBD_INIT_TIMEOUT 1000          /* Timeout in ms for initializing the keyboard */
-#define KBC_TIMEOUT 250                        /* Timeout in ms for sending to keyboard controller */
-#define KBD_TIMEOUT 1000               /* Timeout in ms for keyboard command acknowledge */
-
-/*
- *     Internal variables of the driver
- */
-
-extern unsigned char pckbd_read_mask;
-extern unsigned char aux_device_present;
-
-/*
- *     Keyboard Controller Registers on normal PCs.
- */
-
-#define KBD_STATUS_REG         0x64    /* Status register (R) */
-#define KBD_CNTL_REG           0x64    /* Controller command register (W) */
-#define KBD_DATA_REG           0x60    /* Keyboard data register (R/W) */
-
-/*
- *     Keyboard Controller Commands
- */
-
-#define KBD_CCMD_READ_MODE     0x20    /* Read mode bits */
-#define KBD_CCMD_WRITE_MODE    0x60    /* Write mode bits */
-#define KBD_CCMD_GET_VERSION   0xA1    /* Get controller version */
-#define KBD_CCMD_MOUSE_DISABLE 0xA7    /* Disable mouse interface */
-#define KBD_CCMD_MOUSE_ENABLE  0xA8    /* Enable mouse interface */
-#define KBD_CCMD_TEST_MOUSE    0xA9    /* Mouse interface test */
-#define KBD_CCMD_SELF_TEST     0xAA    /* Controller self test */
-#define KBD_CCMD_KBD_TEST      0xAB    /* Keyboard interface test */
-#define KBD_CCMD_KBD_DISABLE   0xAD    /* Keyboard interface disable */
-#define KBD_CCMD_KBD_ENABLE    0xAE    /* Keyboard interface enable */
-#define KBD_CCMD_WRITE_AUX_OBUF        0xD3    /* Write to output buffer as if
-                                          initiated by the auxiliary device */
-#define KBD_CCMD_WRITE_MOUSE   0xD4    /* Write the following byte to the mouse */
-
-/*
- *     Keyboard Commands
- */
-
-#define KBD_CMD_SET_LEDS       0xED    /* Set keyboard leds */
-#define KBD_CMD_SET_RATE       0xF3    /* Set typematic rate */
-#define KBD_CMD_ENABLE         0xF4    /* Enable scanning */
-#define KBD_CMD_DISABLE                0xF5    /* Disable scanning */
-#define KBD_CMD_RESET          0xFF    /* Reset */
-
-/*
- *     Keyboard Replies
- */
-
-#define KBD_REPLY_POR          0xAA    /* Power on reset */
-#define KBD_REPLY_ACK          0xFA    /* Command ACK */
-#define KBD_REPLY_RESEND       0xFE    /* Command NACK, send the cmd again */
-
-/*
- *     Status Register Bits
- */
-
-#define KBD_STAT_OBF           0x01    /* Keyboard output buffer full */
-#define KBD_STAT_IBF           0x02    /* Keyboard input buffer full */
-#define KBD_STAT_SELFTEST      0x04    /* Self test successful */
-#define KBD_STAT_CMD           0x08    /* Last write was a command write (0=data) */
-#define KBD_STAT_UNLOCKED      0x10    /* Zero if keyboard locked */
-#define KBD_STAT_MOUSE_OBF     0x20    /* Mouse output buffer full */
-#define KBD_STAT_GTO           0x40    /* General receive/xmit timeout */
-#define KBD_STAT_PERR          0x80    /* Parity error */
-
-#define AUX_STAT_OBF (KBD_STAT_OBF | KBD_STAT_MOUSE_OBF)
-
-/*
- *     Controller Mode Register Bits
- */
-
-#define KBD_MODE_KBD_INT       0x01    /* Keyboard data generate IRQ1 */
-#define KBD_MODE_MOUSE_INT     0x02    /* Mouse data generate IRQ12 */
-#define KBD_MODE_SYS           0x04    /* The system flag (?) */
-#define KBD_MODE_NO_KEYLOCK    0x08    /* The keylock doesn't affect the keyboard if set */
-#define KBD_MODE_DISABLE_KBD   0x10    /* Disable keyboard interface */
-#define KBD_MODE_DISABLE_MOUSE 0x20    /* Disable mouse interface */
-#define KBD_MODE_KCC           0x40    /* Scan code conversion to PC format */
-#define KBD_MODE_RFU           0x80
-
-/*
- *     Mouse Commands
- */
-
-#define AUX_SET_RES            0xE8    /* Set resolution */
-#define AUX_SET_SCALE11                0xE6    /* Set 1:1 scaling */
-#define AUX_SET_SCALE21                0xE7    /* Set 2:1 scaling */
-#define AUX_GET_SCALE          0xE9    /* Get scaling factor */
-#define AUX_SET_STREAM         0xEA    /* Set stream mode */
-#define AUX_SET_SAMPLE         0xF3    /* Set sample rate */
-#define AUX_ENABLE_DEV         0xF4    /* Enable aux device */
-#define AUX_DISABLE_DEV                0xF5    /* Disable aux device */
-#define AUX_RESET              0xFF    /* Reset aux device */
-#define AUX_ACK                        0xFA    /* Command byte ACK. */
-
-#define AUX_BUF_SIZE           2048    /* This might be better divisible by
-                                          three to make overruns stay in sync
-                                          but then the read function would need
-                                          a lock etc - ick */
-
-struct aux_queue {
-       unsigned long head;
-       unsigned long tail;
-       wait_queue_head_t proc_list;
-       struct fasync_struct *fasync;
-       unsigned char buf[AUX_BUF_SIZE];
-};