- [ ] cursor is sometimes off-screen when it shouldn't be. I don't know
what cause this yet, but I will try to remember to take notes next
time.
- When seaching backwards and result is just above display, the
+ When searching backwards and result is just above display, the
result doesn't get shown. Sometimes.
- [ ] visiting a new file from a 44 popup is weird.
- [ ] search in history always finds a new history line. It doesn't
check if new patterns still matches this line.
-- [ ] in notmuch cursor should go to search result when changing
+- [ ] in notmuch cursor should go to query result when changing
messages.
- [ ] menu for address completions in email-compose
-- [X] give every pane a link to root/editor main and use that
- instead of statics. Then maybe times_up() can use pane_too_long()
-- [X] mark DEF_CMD structs as const- NO, ->refcnt is not constant.
-- [X] rexel: don't abort if something looks wrong, just fail.
-- [X] check EDLIB_TESTING just once and set a flag in editor, accessible
- as pane_testing(): p->root->data(cast)->testing.
+- [ ] Change times_up() to use pane_too_long()
+- [ ] change :A-x menu to use doc-list - add sorting
+- [ ] Change render-lines to handle centring and right-align in flush_line
+- [ ] Teach render-lines to pad spaces to left/right align text
### Small
-- [X] detect and limit recursion.
-- [X] message-line: use lib-renderline for the one line, so we have
- markup support.
-- [X] history: Make it possible to search through history. Maybe Alt-p only shows
- lines containing current content.
-- [X] emacs: Num-C-l doesn't work if it would require part of a wrapped line
- off top of screen
-- [X] emacs: :C-q to recognise names of Unicode chars: e.g. WASTEBASKET
- Possibly matches a list which continued :C-q cycles through
-- [X] linecount 'view' mode improvements
-- [X] allocate pane->data together with pane. A single allocation so
- that we can avoid the cost of a dereference.
+- [ ] notmuch addresses in From: list to have menu to add address to
+ any from-* query
+- [ ] Disable <hide> if cursor is in the hidden region.
+- [ ] fill mode to handle all punctuation at start of this line
+- [ ] Enable lib-menu to show short-cut keys
+- [ ] Add menu-bar to lib-menu. Pop it up on F10 with simple commands
### Medium
-- [X] lib-mergeview improvements
-- [X] lib-diff slowness with large diff
-- [X] linecount :when used in 'view' mode, stack the counting pane with all the
- others so it can easily catch view-changed.
-- [X] C config module that reads an ini-style file to set attributes
- based on path
-- [X] review all doc:char implementations for simplification.
+- [ ] split range management out of autospell so it can be used by other
+ modules.
- [ ] make it easy for a make-search command to search backwards
+- [ ] Make a start on CUA mode with mouse/menu/selection support.
+ Also Function keys: help, close, refresh
### Large
- [ ] LOG_BT() doesn't see TYPE_pane and TYPE_comm calls.
- [ ] give every pane a link to root/editor main and use that
instead of statics. Then maybe times_up() can use pane_too_long()
-- [X] allocate pane->data together with pane. A single allocation so
- that we can avoid the cost of a dereference.
-- [X] mark DEF_CMD structs as const - doesn't work due to refcount
- [ ] teach input to allow a repeat command to be registered so that e.g.
search/replace and do a bit of work, then ask to be called again.
input can cancel this on suitable input.
Efalse probably becomes 0.
- [ ] send warning message when recursive notification is prohibited.
editor:notify:Message:broadcast
-- [X] detect and limit recursion.
- Each call creates a frame, and each pane has a link to recent frame
- If a call happens on a frame with a link, we check that the same
- 'key' isn't already active.
- [ ] Make DEF_CB really different from DEF_CMD and ensure it is used properly.
- [ ] is DocLeaf really a good idea? Maybe panes should have 'leafward'
pointer separate to 'focus'? Maybe panes could have optional
### lib-askpass
-- [X] New module which server can use to ask for a password.
- When an external program is run, we pass SSH_ASKPASS=client
- and SSH_ASKPASS_REQUIRE=force.
- [ ] have askpass tell shellmode (and others) about the SSH_ASKPASS*
environment, so they don't need to know it themselves
- [ ] start-agent command which runs ssh-agent can records the
### lib-linecount
-- [X] when used in 'view' mode, stack the counting pane with all the
- others so it can easily catch view-changed. In general, make it
- easier to use this way. e.g. easier than catching
- doc:request:doc:CountLines.
- [ ] handle view:changed properly, and make sure total count changes
appropriately in notmuch-query-view. Maybe view:changed should
report if content changed, or just attributes.
- [ ] auto-wrap on a line like this one doesn't recognize all the
punctuation a the start of the line ... should it?
-
+- [ ] fill mode to handle all punctuation at start of this line
### render-format
### rexel
-- [X] don't abort if something looks wrong, just fail.
- [ ] move to separate git repo and document well.
- [ ] review return code of rxl_advance(). What should be
returned if a flag allowed a match, but the char didn't.
### lib-diff
-- [X] When viewing diff or merge can get into infinite loop. Possibly due
- to edit at end-of-file
-- [X] slowness with large diff - particularly lots of "+" lines at end
- [ ] highlight white-space errors.
- [ ] command to apply a hunk to a given document - or to reverse it.
How much of a hunk? Selection? How to record which hunks are done?
### lib-mergeview
-- [X] commands to resolve a conflict with numeric args to :A-m
- negative: discard change, keep original
- 0: if no conflicts remain, wiggle change into place
- 1: ignore conflicts, keep replacement
- 9: if in merge cut patch to copy-buffer
- if there is a selection, paste in patch with selection as
- "orig"
- if no selection - just paste it in with empty orig
-- [X] merge-mode to highlight markers with "space-only" or "no-diff" state
- Also have green for "no conflicts", but it doesn't stand out.
- It would be nice if space-only differences didn't stand out so much.
- That would require different mark-up, or moving a mark around while
- handling map-attr.
- But I want to know about blank conflicts for border highlight.
- So I think I want more markup.
- So: no-conflict: brighter green
- space-conflicts: bold blue
- conflicts: red
- in text, space conflicts get underline, no inverse
-- [X] Capture '-<' and '->' on the marker lines to move the orig section
- w.r.t surrounding text, or to prune the before and after sections.
- [ ] Consider what else can be done with < and > on other markers.
-- [X] Capture :CX:C-x command to cycle through matching places in the
- three branches.
-- [X] merge-mode automatic detect, enable, goto-first
- I'm not sure I want this, but probably try it and see
- Maybe time-limit on search
+- [ ] Capture a new doc-reappeared for when reloaded, and search again
+ for markers.
### emacs
- [ ] there is no way to count characters in a range, or find how many
characters into the document I am. Maybe bytes would be good too.
-- [X] Num-C-l doesn't work if it would require part of a wrapped line
- off top of screen
-- [X] :C-q to recognise names of Unicode chars: e.g. WASTEBASKET
- Possibly matches a list which continued :C-q cycles through
- [ ] :CX-= to look-up unicode name of character if not ASCII
- [ ] ":C-q ?" or "- :C-q" to open a find dialog with list of unicode
chars.
-- [X] :C-q when finding unicode chars, allow repeated :C-q to find more
- [ ] split some generic functionality like arrows and mouse clicks
into a separate module to be shared with other edit modes.
- [ ] sort the command names for command-completion?
#### history
-- [X] Make it possible to search through history. Maybe Alt-p only shows
- lines containing current content.
-
### ncurses
- [ ] add full list of colour names (to lib-colourmap)
- [ ] the background "call:" option should report if background was changed.
An attribute could store chosen information for comparison.
Would need a 'force' flag.
-- [X] Replace <attr> text </> in markup with SOH attr STX text ETX
- This also affects lib-markup and others.
- [ ] I regularly hit problems because ->mdata is not up to date and we render
to find a cursor and compare with ->mdata and get confusion. How can I avoid this?
- [ ] view:changed shouldn't destroy the view, else Move-CursorXY
- [ ] if the first char if a line is marked for <wrap> it disappears
without cursor. This is bad.
+### lib-markup
+
+- [ ] Disable <hide> if cursor is in the hidden region.
+
### lib-macro
timestamp updates on the minute.
- [ ] allow marked-up messages to be given.
- [ ] Differentiate warnings from info, and blink-screen for warnings.
-- [X] use lib-renderline for the one line, so we have markup support.
### docs
- [ ] make sure Clone actually works for all panes - or remove it
- [ ] add counter and colour for 'flagged'
- [ ] if no 'query.current' use "not exclude_tags"
-- [X] change from "saved:" to "query:" after re-organizing my queries.
- [ ] support selection messages and applying tags
- [ ] When changing any tag in a thread, or when opening the thread,
assess thread tags by looking at all matched messages.
### Notmuch message display
+- [ ] notmuch addresses in From: list to have menu to add address to
+ any from-* query
- [ ] "%d quoted lines" still not quite right. Moving 'down' past it
jumps to end of line.
- [ ] Don't wrap email header lines when cursor isn't on the line - too noisy
### dynamic completion
-- [X] provide a drop-down menu with options
- [ ] unify UI with spell
### spell-checker
- [ ] Some way for 'c-mode' to report where comments are so they can be spell-checked
- [ ] drop-down with options
- [ ] unify UI with dynamic-completion
+- [ ] split range management out of autospell so it can be used by other
+ modules.
### calculator
- [ ] regression test
### lib-menu
-- [X] popup menu to which we can add entries, pop it at a location, get
- a selection
+- [ ] Enable lib-menu to show short-cut keys
- [ ] menu-bar to which we can add menus from which commands are sent
- [ ] track movement so entry under cursor can be highlighted
- [ ] support positioning above the target is no space below.
### config
-- [X] C config module that reads an ini-style file to set attributes
- based on path
-- [X] configure "initial_panes"
-- [X] discard old auto-load??
- [ ] file patterns for "complete" to (optionally) ignore
- [ ] read .gitignore and add to "ignore" list
- [ ] top/bottom margin - "render-vmargin" set on view or doc??
- spreadsheet cells for auto calculations.
- outlining support of course.
+Syntax - markdown plus...
+
+Lines:
+- basic paragraph: not indented more than 3 spaces
+- heading: starts # or single line followed by 3 or more - or = on next
+ line
+- bullet list: lines starts '-' in first 4. Following lines that are
+ indented are included. Maybe '*' or '+' also do same?? A waste
+- number list: digits period.
+- block-quote: lines start '>' These nest naturally
+- code: lines indented with no prefix
+- fenced code: line starts ``` then until a close. Ouch - hard to parse
+ backwards
+- horzontal rule: --- or ___ or *** and nothing else following blank line
+
+- table. Line start '|' continue to blank line.??
+ A row starts with '|' at start of line and ends with '|' at end of line.
+- formatting info starts ':'
+- image: 
+- reference [label]: link "text" If link in HERE then internal
+ reference. link can have #label to find label in that file.
+
+Special:
+- is a line ends 2 or more spaces, hard line break. If 0 or 1, then continue
+
+Intra line:
+ **word** is bold
+ _word_ is italic
+ `word` is monospaced (code)
+ [word] is a link. [word](link) is too
+ or [word](link "title text")
+
+ <url>
+ <user@domian.thing>
+
+ \X is X literal. \ * _ `
+
+ $=number[calculation](format)
+
+Formatting controls..
+
Non-module functionality
------------------------
-
### Documentation
Both user-documentation and developer documentation, extracted from
projects / edlib.git / commitdiff