struct usb_string_descriptor StringDesc;
struct usb_string_descriptor *pStringDesc;
- dbg(__FUNCTION__ " - USB String ID = %d", Id );
+ dbg("%s - USB String ID = %d", __FUNCTION__, Id );
if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) {
return 0;
struct usb_string_descriptor StringDesc;
struct usb_string_descriptor *pStringDesc;
- dbg(__FUNCTION__ " - USB String ID = %d", Id );
+ dbg("%s - USB String ID = %d", __FUNCTION__, Id );
if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, sizeof(StringDesc))) {
return 0;
int portNumber;
int result;
- dbg(__FUNCTION__);
+ dbg("%s", __FUNCTION__);
if (serial_paranoia_check (edge_serial->serial, __FUNCTION__)) {
return;
}
if (urb->status) {
- dbg(__FUNCTION__" - nonzero control read status received: %d", urb->status);
+ dbg("%s - nonzero control read status received: %d", __FUNCTION__, urb->status);
return;
}
bytes_avail = data[0] | (data[1] << 8);
if (bytes_avail) {
edge_serial->rxBytesAvail += bytes_avail;
- dbg(__FUNCTION__" - bytes_avail = %d, rxBytesAvail %d", bytes_avail, edge_serial->rxBytesAvail);
+ dbg("%s - bytes_avail = %d, rxBytesAvail %d", __FUNCTION__, bytes_avail, edge_serial->rxBytesAvail);
if ((edge_serial->rxBytesAvail > 0) &&
(edge_serial->read_urb->status != -EINPROGRESS)) {
edge_serial->read_urb->dev = edge_serial->serial->dev;
result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
if (result) {
- dbg(__FUNCTION__" - usb_submit_urb(read bulk) failed with result = %d", result);
+ dbg("%s - usb_submit_urb(read bulk) failed with result = %d", __FUNCTION__, result);
}
}
}
edge_port = (struct edgeport_port *)port->private;
if (edge_port->open) {
edge_port->txCredits += txCredits;
- dbg(__FUNCTION__" - txcredits for port%d = %d", portNumber, edge_port->txCredits);
+ dbg("%s - txcredits for port%d = %d", __FUNCTION__, portNumber, edge_port->txCredits);
/* tell the tty driver that something has changed */
if (edge_port->port->tty)
int status;
__u16 raw_data_length;
- dbg(__FUNCTION__);
+ dbg("%s", __FUNCTION__);
if (serial_paranoia_check (edge_serial->serial, __FUNCTION__)) {
return;
}
if (urb->status) {
- dbg(__FUNCTION__" - nonzero read bulk status received: %d", urb->status);
+ dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
return;
}
/* decrement our rxBytes available by the number that we just got */
edge_serial->rxBytesAvail -= raw_data_length;
- dbg(__FUNCTION__" - Received = %d, rxBytesAvail %d", raw_data_length, edge_serial->rxBytesAvail);
+ dbg("%s - Received = %d, rxBytesAvail %d", __FUNCTION__, raw_data_length, edge_serial->rxBytesAvail);
process_rcvd_data (edge_serial, data, urb->actual_length);
edge_serial->read_urb->dev = edge_serial->serial->dev;
status = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
if (status) {
- err(__FUNCTION__" - usb_submit_urb(read bulk) failed, status = %d", status);
+ err("%s - usb_submit_urb(read bulk) failed, status = %d", __FUNCTION__, status);
}
}
}
struct edgeport_port *edge_port = (struct edgeport_port *)urb->context;
struct tty_struct *tty;
- dbg(__FUNCTION__);
+ dbg("%s", __FUNCTION__);
if (port_paranoia_check (edge_port->port, __FUNCTION__)) {
return;
}
if (urb->status) {
- dbg(__FUNCTION__" - nonzero write bulk status received: %d", urb->status);
+ dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
}
tty = edge_port->port->tty;
struct tty_struct *tty;
int status = urb->status;
- dbg(__FUNCTION__);
+ dbg("%s", __FUNCTION__);
CmdUrbs--;
- dbg(__FUNCTION__" - FREE URB %p (outstanding %d)", urb, CmdUrbs);
+ dbg("%s - FREE URB %p (outstanding %d)", __FUNCTION__, urb, CmdUrbs);
/* clean up the transfer buffer */
}
if (status) {
- dbg(__FUNCTION__" - nonzero write bulk status received: %d", status);
+ dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, status);
return;
}
if (port_paranoia_check (port, __FUNCTION__))
return -ENODEV;
- dbg(__FUNCTION__ " - port %d", port->number);
+ dbg("%s - port %d", __FUNCTION__, port->number);
if (edge_port == NULL)
return -ENODEV;
* this interrupt will continue as long as the edgeport is connected */
response = usb_submit_urb (edge_serial->interrupt_read_urb, GFP_KERNEL);
if (response) {
- err(__FUNCTION__" - Error %d submitting control urb", response);
+ err("%s - Error %d submitting control urb", __FUNCTION__, response);
}
}
response = send_iosp_ext_cmd (edge_port, IOSP_CMD_OPEN_PORT, 0);
if (response < 0) {
- err(__FUNCTION__" - error sending open port command");
+ err("%s - error sending open port command", __FUNCTION__);
edge_port->openPending = FALSE;
return -ENODEV;
}
if (edge_port->open == FALSE) {
/* open timed out */
- dbg(__FUNCTION__" - open timedout");
+ dbg("%s - open timedout", __FUNCTION__);
edge_port->openPending = FALSE;
return -ENODEV;
}
edge_port->txfifo.fifo = kmalloc (edge_port->maxTxCredits, GFP_KERNEL);
if (!edge_port->txfifo.fifo) {
- dbg(__FUNCTION__" - no memory");
+ dbg("%s - no memory", __FUNCTION__);
edge_close (port, filp);
return -ENOMEM;
}
edge_port->write_urb = usb_alloc_urb (0, GFP_KERNEL);
if (!edge_port->write_urb) {
- dbg(__FUNCTION__" - no memory");
+ dbg("%s - no memory", __FUNCTION__);
edge_close (port, filp);
return -ENOMEM;
}
- dbg(__FUNCTION__"(%d) - Initialize TX fifo to %d bytes", port->number, edge_port->maxTxCredits);
+ dbg("%s(%d) - Initialize TX fifo to %d bytes", __FUNCTION__, port->number, edge_port->maxTxCredits);
- dbg(__FUNCTION__" exited");
+ dbg("%s exited", __FUNCTION__);
return 0;
}
// Did we get our Chase response
if (edge_port->chaseResponsePending == FALSE) {
- dbg(__FUNCTION__" - Got Chase Response");
+ dbg("%s - Got Chase Response", __FUNCTION__);
// did we get all of our credit back?
if (edge_port->txCredits == edge_port->maxTxCredits ) {
- dbg(__FUNCTION__" - Got all credits");
+ dbg("%s - Got all credits", __FUNCTION__);
return;
}
}
wait--;
if (wait == 0) {
edge_port->chaseResponsePending = FALSE;
- dbg(__FUNCTION__" - Chase TIMEOUT");
+ dbg("%s - Chase TIMEOUT", __FUNCTION__);
return;
}
} else {
// Reset timout value back to 10 seconds
- dbg(__FUNCTION__" - Last %d, Current %d", lastCredits, edge_port->txCredits);
+ dbg("%s - Last %d, Current %d", __FUNCTION__, lastCredits, edge_port->txCredits);
wait = 10;
}
}
// Is the Edgeport Buffer empty?
if (lastCount == 0) {
- dbg(__FUNCTION__" - TX Buffer Empty");
+ dbg("%s - TX Buffer Empty", __FUNCTION__);
return;
}
// Block the thread for a while
interruptible_sleep_on_timeout (&edge_port->wait_chase, timeout);
- dbg(__FUNCTION__ " wait");
+ dbg("%s wait", __FUNCTION__);
if (lastCount == fifo->count) {
// No activity.. count down.
wait--;
if (wait == 0) {
- dbg(__FUNCTION__" - TIMEOUT");
+ dbg("%s - TIMEOUT", __FUNCTION__);
return;
}
} else {
if (port_paranoia_check (port, __FUNCTION__))
return;
- dbg(__FUNCTION__ " - port %d", port->number);
+ dbg("%s - port %d", __FUNCTION__, port->number);
serial = get_usb_serial (port, __FUNCTION__);
if (!serial)
/* flush and chase */
edge_port->chaseResponsePending = TRUE;
- dbg(__FUNCTION__" - Sending IOSP_CMD_CHASE_PORT");
+ dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__);
status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0);
if (status == 0) {
// block until chase finished
}
/* close the port */
- dbg(__FUNCTION__" - Sending IOSP_CMD_CLOSE_PORT");
+ dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __FUNCTION__);
send_iosp_ext_cmd (edge_port, IOSP_CMD_CLOSE_PORT, 0);
//port->close = TRUE;
kfree(edge_port->txfifo.fifo);
}
- dbg(__FUNCTION__" exited");
+ dbg("%s exited", __FUNCTION__);
}
/*****************************************************************************
int firsthalf;
int secondhalf;
- dbg(__FUNCTION__ " - port %d", port->number);
+ dbg("%s - port %d", __FUNCTION__, port->number);
if (edge_port == NULL)
return -ENODEV;
// calculate number of bytes to put in fifo
copySize = min ((unsigned int)count, (edge_port->txCredits - fifo->count));
- dbg(__FUNCTION__"(%d) of %d byte(s) Fifo room %d -- will copy %d bytes",
+ dbg("%s(%d) of %d byte(s) Fifo room %d -- will copy %d bytes", __FUNCTION__,
port->number, count, edge_port->txCredits - fifo->count, copySize);
/* catch writes of 0 bytes which the tty driver likes to give us, and when txCredits is empty */
if (copySize == 0) {
- dbg (__FUNCTION__" - copySize = Zero");
+ dbg("%s - copySize = Zero", __FUNCTION__);
return 0;
}
bytesleft = fifo->size - fifo->head;
firsthalf = min (bytesleft, copySize);
- dbg (__FUNCTION__" - copy %d bytes of %d into fifo ", firsthalf, bytesleft);
+ dbg("%s - copy %d bytes of %d into fifo ", __FUNCTION__, firsthalf, bytesleft);
/* now copy our data */
if (from_user) {
secondhalf = copySize-firsthalf;
if (secondhalf) {
- dbg (__FUNCTION__" - copy rest of data %d", secondhalf);
+ dbg("%s - copy rest of data %d", __FUNCTION__, secondhalf);
if (from_user) {
if (copy_from_user(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf))
return -EFAULT;
send_more_port_data((struct edgeport_serial *)port->serial->private, edge_port);
- dbg(__FUNCTION__" wrote %d byte(s) TxCredits %d, Fifo %d", copySize, edge_port->txCredits, fifo->count);
+ dbg("%s wrote %d byte(s) TxCredits %d, Fifo %d", __FUNCTION__, copySize, edge_port->txCredits, fifo->count);
return copySize;
}
int firsthalf;
int secondhalf;
- dbg(__FUNCTION__"(%d)", edge_port->port->number);
+ dbg("%s(%d)", __FUNCTION__, edge_port->port->number);
if (edge_port->write_in_progress ||
!edge_port->open ||
(fifo->count == 0)) {
- dbg(__FUNCTION__"(%d) EXIT - fifo %d, PendingWrite = %d", edge_port->port->number, fifo->count, edge_port->write_in_progress);
+ dbg("%s(%d) EXIT - fifo %d, PendingWrite = %d", __FUNCTION__, edge_port->port->number, fifo->count, edge_port->write_in_progress);
return;
}
// it's better to wait for more credits so we can do a larger
// write.
if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits)) {
- dbg(__FUNCTION__"(%d) Not enough credit - fifo %d TxCredit %d", edge_port->port->number, fifo->count, edge_port->txCredits );
+ dbg("%s(%d) Not enough credit - fifo %d TxCredit %d", __FUNCTION__, edge_port->port->number, fifo->count, edge_port->txCredits );
return;
}
count = fifo->count;
buffer = kmalloc (count+2, GFP_ATOMIC);
if (buffer == NULL) {
- err(__FUNCTION__" - no more kernel memory...");
+ err("%s - no more kernel memory...", __FUNCTION__);
edge_port->write_in_progress = FALSE;
return;
}
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
/* something went wrong */
- dbg(__FUNCTION__" - usb_submit_urb(write bulk) failed");
+ dbg("%s - usb_submit_urb(write bulk) failed", __FUNCTION__);
edge_port->write_in_progress = FALSE;
} else {
/* decrement the number of credits we have by the number we just sent */
edge_port->txCredits -= count;
edge_port->icount.tx += count;
}
- dbg(__FUNCTION__" wrote %d byte(s) TxCredit %d, Fifo %d", count, edge_port->txCredits, fifo->count);
+ dbg("%s wrote %d byte(s) TxCredit %d, Fifo %d", __FUNCTION__, count, edge_port->txCredits, fifo->count);
}
struct edgeport_port *edge_port = (struct edgeport_port *)(port->private);
int room;
- dbg(__FUNCTION__);
+ dbg("%s", __FUNCTION__);
if (edge_port == NULL)
return -ENODEV;
if (edge_port->closePending == TRUE)
return -ENODEV;
- dbg(__FUNCTION__" - port %d", port->number);
+ dbg("%s - port %d", __FUNCTION__, port->number);
if (!edge_port->open) {
- dbg (__FUNCTION__" - port not opened");
+ dbg("%s - port not opened", __FUNCTION__);
return -EINVAL;
}
// total of both buffers is still txCredit
room = edge_port->txCredits - edge_port->txfifo.count;
- dbg(__FUNCTION__" - returns %d", room);
+ dbg("%s - returns %d", __FUNCTION__, room);
return room;
}
struct edgeport_port *edge_port = (struct edgeport_port *)(port->private);
int num_chars;
- dbg(__FUNCTION__);
+ dbg("%s", __FUNCTION__);
if (edge_port == NULL)
return -ENODEV;
return -ENODEV;
if (!edge_port->open) {
- dbg (__FUNCTION__" - port not opened");
+ dbg("%s - port not opened", __FUNCTION__);
return -EINVAL;
}
num_chars = edge_port->maxTxCredits - edge_port->txCredits + edge_port->txfifo.count;
if (num_chars) {
- dbg(__FUNCTION__"(port %d) - returns %d", port->number, num_chars);
+ dbg("%s(port %d) - returns %d", __FUNCTION__, port->number, num_chars);
}
return num_chars;
struct tty_struct *tty;
int status;
- dbg(__FUNCTION__" - port %d", port->number);
+ dbg("%s - port %d", __FUNCTION__, port->number);
if (edge_port == NULL)
return;
if (!edge_port->open) {
- dbg (__FUNCTION__" - port not opened");
+ dbg("%s - port not opened", __FUNCTION__);
return;
}
struct tty_struct *tty;
int status;
- dbg(__FUNCTION__" - port %d", port->number);
+ dbg("%s - port %d", __FUNCTION__, port->number);
if (edge_port == NULL)
return;
if (!edge_port->open) {
- dbg (__FUNCTION__" - port not opened");
+ dbg("%s - port not opened", __FUNCTION__);
return;
}
if (old_termios) {
if ((cflag == old_termios->c_cflag) &&
(RELEVANT_IFLAG(tty->termios->c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) {
- dbg(__FUNCTION__" - nothing to change");
+ dbg("%s - nothing to change", __FUNCTION__);
return;
}
}
RELEVANT_IFLAG(old_termios->c_iflag));
}
- dbg(__FUNCTION__" - port %d", port->number);
+ dbg("%s - port %d", __FUNCTION__, port->number);
if (edge_port == NULL)
return;
if (!edge_port->open) {
- dbg (__FUNCTION__" - port not opened");
+ dbg("%s - port not opened", __FUNCTION__);
return;
}
if (edge_port->maxTxCredits == edge_port->txCredits &&
edge_port->txfifo.count == 0) {
- dbg(__FUNCTION__" -- Empty");
+ dbg("%s -- Empty", __FUNCTION__);
result = TIOCSER_TEMT;
}
result = tty->read_cnt;
- dbg(__FUNCTION__"(%d) = %d", edge_port->port->number, result);
+ dbg("%s(%d) = %d", __FUNCTION__, edge_port->port->number, result);
if (copy_to_user(value, &result, sizeof(int)))
return -EFAULT;
//return 0;
| ((msr & MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */
- dbg(__FUNCTION__" -- %x", result);
+ dbg("%s -- %x", __FUNCTION__, result);
if (copy_to_user(value, &result, sizeof(int)))
return -EFAULT;
struct serial_icounter_struct icount;
- dbg(__FUNCTION__" - port %d, cmd = 0x%x", port->number, cmd);
+ dbg("%s - port %d, cmd = 0x%x", __FUNCTION__, port->number, cmd);
switch (cmd) {
// return number of bytes available
case TIOCINQ:
- dbg(__FUNCTION__" (%d) TIOCINQ", port->number);
+ dbg("%s (%d) TIOCINQ", __FUNCTION__, port->number);
return get_number_bytes_avail(edge_port, (unsigned int *) arg);
break;
case TIOCSERGETLSR:
- dbg(__FUNCTION__" (%d) TIOCSERGETLSR", port->number);
+ dbg("%s (%d) TIOCSERGETLSR", __FUNCTION__, port->number);
return get_lsr_info(edge_port, (unsigned int *) arg);
return 0;
case TIOCMBIS:
case TIOCMBIC:
case TIOCMSET:
- dbg(__FUNCTION__" (%d) TIOCMSET/TIOCMBIC/TIOCMSET", port->number);
+ dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __FUNCTION__, port->number);
return set_modem_info(edge_port, cmd, (unsigned int *) arg);
case TIOCMGET:
- dbg(__FUNCTION__" (%d) TIOCMGET", port->number);
+ dbg("%s (%d) TIOCMGET", __FUNCTION__, port->number);
return get_modem_info(edge_port, (unsigned int *) arg);
case TIOCGSERIAL:
- dbg(__FUNCTION__" (%d) TIOCGSERIAL", port->number);
+ dbg("%s (%d) TIOCGSERIAL", __FUNCTION__, port->number);
return get_serial_info(edge_port, (struct serial_struct *) arg);
case TIOCSSERIAL:
- dbg(__FUNCTION__" (%d) TIOCSSERIAL", port->number);
+ dbg("%s (%d) TIOCSSERIAL", __FUNCTION__, port->number);
break;
case TIOCMIWAIT:
- dbg(__FUNCTION__" (%d) TIOCMIWAIT", port->number);
+ dbg("%s (%d) TIOCMIWAIT", __FUNCTION__, port->number);
cprev = edge_port->icount;
while (1) {
interruptible_sleep_on(&edge_port->delta_msr_wait);
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
- dbg(__FUNCTION__" (%d) TIOCGICOUNT RX=%d, TX=%d", port->number, icount.rx, icount.tx );
+ dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, port->number, icount.rx, icount.tx );
if (copy_to_user((void *)arg, &icount, sizeof(icount)))
return -EFAULT;
return 0;
/* flush and chase */
edge_port->chaseResponsePending = TRUE;
- dbg(__FUNCTION__" - Sending IOSP_CMD_CHASE_PORT");
+ dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__);
status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0);
if (status == 0) {
// block until chase finished
}
if (break_state == -1) {
- dbg(__FUNCTION__" - Sending IOSP_CMD_SET_BREAK");
+ dbg("%s - Sending IOSP_CMD_SET_BREAK", __FUNCTION__);
status = send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_BREAK, 0);
} else {
- dbg(__FUNCTION__" - Sending IOSP_CMD_CLEAR_BREAK");
+ dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __FUNCTION__);
status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CLEAR_BREAK, 0);
}
if (status) {
- dbg(__FUNCTION__" - error sending break set/clear command.");
+ dbg("%s - error sending break set/clear command.", __FUNCTION__);
}
return;
__u16 rxLen;
int i;
- dbg(__FUNCTION__);
+ dbg("%s", __FUNCTION__);
lastBufferLength = bufferLength + 1;
while (bufferLength > 0) {
/* failsafe incase we get a message that we don't understand */
if (lastBufferLength == bufferLength) {
- dbg(__FUNCTION__" - stuck in loop, exiting it.");
+ dbg("%s - stuck in loop, exiting it.", __FUNCTION__);
break;
}
lastBufferLength = bufferLength;
++buffer;
--bufferLength;
- dbg(__FUNCTION__" - Hdr1=%02X Hdr2=%02X", edge_serial->rxHeader1, edge_serial->rxHeader2);
+ dbg("%s - Hdr1=%02X Hdr2=%02X", __FUNCTION__, edge_serial->rxHeader1, edge_serial->rxHeader2);
// Process depending on whether this header is
// data or status
edge_serial->rxPort = IOSP_GET_HDR_PORT(edge_serial->rxHeader1);
edge_serial->rxBytesRemaining = IOSP_GET_HDR_DATA_LEN(edge_serial->rxHeader1, edge_serial->rxHeader2);
- dbg(__FUNCTION__" - Data for Port %u Len %u", edge_serial->rxPort, edge_serial->rxBytesRemaining);
+ dbg("%s - Data for Port %u Len %u", __FUNCTION__, edge_serial->rxPort, edge_serial->rxBytesRemaining);
//ASSERT( DevExt->RxPort < DevExt->NumPorts );
//ASSERT( DevExt->RxBytesRemaining < IOSP_MAX_DATA_LENGTH );
if (edge_port->open) {
tty = edge_port->port->tty;
if (tty) {
- dbg (__FUNCTION__" - Sending %d bytes to TTY for port %d", rxLen, edge_serial->rxPort);
+ dbg("%s - Sending %d bytes to TTY for port %d", __FUNCTION__, rxLen, edge_serial->rxPort);
for (i = 0; i < rxLen ; ++i) {
/* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
}
edge_port = (struct edgeport_port *)port->private;
if (edge_port == NULL) {
- err (__FUNCTION__ " - edge_port == NULL for port %d", edge_serial->rxPort);
+ err("%s - edge_port == NULL for port %d", __FUNCTION__, edge_serial->rxPort);
return;
}
- dbg(__FUNCTION__" - port %d", edge_serial->rxPort);
+ dbg("%s - port %d", __FUNCTION__, edge_serial->rxPort);
if (code == IOSP_EXT_STATUS) {
switch (byte2) {
case IOSP_EXT_STATUS_CHASE_RSP:
// we want to do EXT status regardless of port open/closed
- dbg(__FUNCTION__" - Port %u EXT CHASE_RSP Data = %02x", edge_serial->rxPort, byte3 );
+ dbg("%s - Port %u EXT CHASE_RSP Data = %02x", __FUNCTION__, edge_serial->rxPort, byte3 );
// Currently, the only EXT_STATUS is Chase, so process here instead of one more call
// to one more subroutine. If/when more EXT_STATUS, there'll be more work to do.
// Also, we currently clear flag and close the port regardless of content of above's Byte3.
return;
case IOSP_EXT_STATUS_RX_CHECK_RSP:
- dbg( __FUNCTION__" ========== Port %u CHECK_RSP Sequence = %02x =============\n", edge_serial->rxPort, byte3 );
+ dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __FUNCTION__, edge_serial->rxPort, byte3 );
//Port->RxCheckRsp = TRUE;
return;
}
if (code == IOSP_STATUS_OPEN_RSP) {
edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
edge_port->maxTxCredits = edge_port->txCredits;
- dbg (__FUNCTION__" - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", edge_serial->rxPort, byte2, edge_port->txCredits);
+ dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __FUNCTION__, edge_serial->rxPort, byte2, edge_port->txCredits);
handle_new_msr (edge_port, byte2);
/* send the current line settings to the port so we are in sync with any further termios calls */
switch (code) {
// Not currently sent by Edgeport
case IOSP_STATUS_LSR:
- dbg(__FUNCTION__" - Port %u LSR Status = %02x", edge_serial->rxPort, byte2);
+ dbg("%s - Port %u LSR Status = %02x", __FUNCTION__, edge_serial->rxPort, byte2);
handle_new_lsr (edge_port, FALSE, byte2, 0);
break;
case IOSP_STATUS_LSR_DATA:
- dbg(__FUNCTION__" - Port %u LSR Status = %02x, Data = %02x", edge_serial->rxPort, byte2, byte3);
+ dbg("%s - Port %u LSR Status = %02x, Data = %02x", __FUNCTION__, edge_serial->rxPort, byte2, byte3);
// byte2 is LSR Register
// byte3 is broken data byte
handle_new_lsr (edge_port, TRUE, byte2, byte3);
break;
//
// case IOSP_EXT_4_STATUS:
- // dbg(__FUNCTION__" - Port %u LSR Status = %02x Data = %02x", edge_serial->rxPort, byte2, byte3);
+ // dbg("%s - Port %u LSR Status = %02x Data = %02x", __FUNCTION__, edge_serial->rxPort, byte2, byte3);
// break;
//
case IOSP_STATUS_MSR:
- dbg(__FUNCTION__" - Port %u MSR Status = %02x", edge_serial->rxPort, byte2);
+ dbg("%s - Port %u MSR Status = %02x", __FUNCTION__, edge_serial->rxPort, byte2);
// Process this new modem status and generate appropriate
// events, etc, based on the new status. This routine
break;
default:
- dbg(__FUNCTION__" - Unrecognized IOSP status code %u\n", code);
+ dbg("%s - Unrecognized IOSP status code %u\n", __FUNCTION__, code);
break;
}
{
struct async_icount *icount;
- dbg(__FUNCTION__" %02x", newMsr);
+ dbg("%s %02x", __FUNCTION__, newMsr);
if (newMsr & (MSR_DELTA_CTS | MSR_DELTA_DSR | MSR_DELTA_RI | MSR_DELTA_CD)) {
icount = &edge_port->icount;
__u8 newLsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK));
struct async_icount *icount;
- dbg(__FUNCTION__" - %02x", newLsr);
+ dbg("%s - %02x", __FUNCTION__, newLsr);
edge_port->shadowLSR = lsr;
__u16 current_length;
unsigned char *transfer_buffer;
-// dbg (__FUNCTION__" - %x, %x, %d", extAddr, addr, length);
+// dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, length);
transfer_buffer = kmalloc (64, GFP_KERNEL);
if (!transfer_buffer) {
- err(__FUNCTION__" - kmalloc(%d) failed.\n", 64);
+ err("%s - kmalloc(%d) failed.\n", __FUNCTION__, 64);
return -ENOMEM;
}
} else {
current_length = length;
}
-// dbg (__FUNCTION__" - writing %x, %x, %d", extAddr, addr, current_length);
+// dbg("%s - writing %x, %x, %d", __FUNCTION__, extAddr, addr, current_length);
memcpy (transfer_buffer, data, current_length);
result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_RAM,
0x40, addr, extAddr, transfer_buffer, current_length, 300);
__u16 current_length;
unsigned char *transfer_buffer;
-// dbg (__FUNCTION__" - %x, %x, %d", extAddr, addr, length);
+// dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, length);
transfer_buffer = kmalloc (64, GFP_KERNEL);
if (!transfer_buffer) {
- err(__FUNCTION__" - kmalloc(%d) failed.\n", 64);
+ err("%s - kmalloc(%d) failed.\n", __FUNCTION__, 64);
return -ENOMEM;
}
} else {
current_length = length;
}
-// dbg (__FUNCTION__" - writing %x, %x, %d", extAddr, addr, current_length);
+// dbg("%s - writing %x, %x, %d", __FUNCTION__, extAddr, addr, current_length);
memcpy (transfer_buffer, data, current_length);
result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), USB_REQUEST_ION_WRITE_ROM,
0x40, addr, extAddr, transfer_buffer, current_length, 300);
__u16 current_length;
unsigned char *transfer_buffer;
- dbg (__FUNCTION__" - %x, %x, %d", extAddr, addr, length);
+ dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, length);
transfer_buffer = kmalloc (64, GFP_KERNEL);
if (!transfer_buffer) {
- err(__FUNCTION__" - kmalloc(%d) failed.\n", 64);
+ err("%s - kmalloc(%d) failed.\n", __FUNCTION__, 64);
return -ENOMEM;
}
} else {
current_length = length;
}
-// dbg (__FUNCTION__" - %x, %x, %d", extAddr, addr, current_length);
+// dbg("%s - %x, %x, %d", __FUNCTION__, extAddr, addr, current_length);
result = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), USB_REQUEST_ION_READ_ROM,
0xC0, addr, extAddr, transfer_buffer, current_length, 300);
if (result < 0)
int length = 0;
int status = 0;
- dbg(__FUNCTION__" - %d, %d", command, param);
+ dbg("%s - %d, %d", __FUNCTION__, command, param);
buffer = kmalloc (10, GFP_ATOMIC);
if (!buffer) {
- err(__FUNCTION__" - kmalloc(%d) failed.\n", 10);
+ err("%s - kmalloc(%d) failed.\n", __FUNCTION__, 10);
return -ENOMEM;
}
return -ENOMEM;
CmdUrbs++;
- dbg(__FUNCTION__" - ALLOCATE URB %p (outstanding %d)", urb, CmdUrbs);
+ dbg("%s - ALLOCATE URB %p (outstanding %d)", __FUNCTION__, urb, CmdUrbs);
FILL_BULK_URB (urb, edge_serial->serial->dev,
usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint),
if (status) {
/* something went wrong */
- dbg(__FUNCTION__" - usb_submit_urb(write bulk) failed");
+ dbg("%s - usb_submit_urb(write bulk) failed", __FUNCTION__);
usb_unlink_urb (urb);
usb_free_urb (urb);
return status;
if (edge_port->commandPending == TRUE) {
/* command timed out */
- dbg(__FUNCTION__" - command timed out");
+ dbg("%s - command timed out", __FUNCTION__);
status = -EINVAL;
}
#endif
int status;
unsigned char number = edge_port->port->number - edge_port->port->serial->minor;
- dbg(__FUNCTION__" - port = %d, baud = %d", edge_port->port->number, baudRate);
+ dbg("%s - port = %d, baud = %d", __FUNCTION__, edge_port->port->number, baudRate);
status = calc_baud_rate_divisor (baudRate, &divisor);
if (status) {
- err(__FUNCTION__" - bad baud rate");
+ err("%s - bad baud rate", __FUNCTION__);
return status;
}
// Alloc memory for the string of commands.
cmdBuffer = kmalloc (0x100, GFP_ATOMIC);
if (!cmdBuffer) {
- err(__FUNCTION__" - kmalloc(%d) failed.\n", 0x100);
+ err("%s - kmalloc(%d) failed.\n", __FUNCTION__, 0x100);
return -ENOMEM;
}
currCmd = cmdBuffer;
__u16 round;
- dbg(__FUNCTION__" - %d", baudrate);
+ dbg("%s - %d", __FUNCTION__, baudrate);
for (i = 0; i < NUM_ENTRIES(divisor_table); i++) {
if ( divisor_table[i].BaudRate == baudrate ) {
}
*divisor = custom;
- dbg(__FUNCTION__" - Baud %d = %d\n", baudrate, custom);
+ dbg("%s - Baud %d = %d\n", __FUNCTION__, baudrate, custom);
return 0;
}
unsigned long cmdLen = 0;
int status;
- dbg (__FUNCTION__" - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", regValue);
+ dbg("%s - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", __FUNCTION__, regValue);
// Alloc memory for the string of commands.
cmdBuffer = kmalloc (0x10, GFP_ATOMIC);
__u8 txFlow;
int status;
- dbg(__FUNCTION__" - port %d", edge_port->port->number);
+ dbg("%s - port %d", __FUNCTION__, edge_port->port->number);
if ((!edge_port->open) &&
(!edge_port->openPending)) {
- dbg(__FUNCTION__" - port not opened");
+ dbg("%s - port not opened", __FUNCTION__);
return;
}
tty = edge_port->port->tty;
if ((!tty) ||
(!tty->termios)) {
- dbg(__FUNCTION__" - no tty structures");
+ dbg("%s - no tty structures", __FUNCTION__);
return;
}
cflag = tty->termios->c_cflag;
switch (cflag & CSIZE) {
- case CS5: lData = LCR_BITS_5; mask = 0x1f; dbg(__FUNCTION__" - data bits = 5"); break;
- case CS6: lData = LCR_BITS_6; mask = 0x3f; dbg(__FUNCTION__" - data bits = 6"); break;
- case CS7: lData = LCR_BITS_7; mask = 0x7f; dbg(__FUNCTION__" - data bits = 7"); break;
+ case CS5: lData = LCR_BITS_5; mask = 0x1f; dbg("%s - data bits = 5", __FUNCTION__); break;
+ case CS6: lData = LCR_BITS_6; mask = 0x3f; dbg("%s - data bits = 6", __FUNCTION__); break;
+ case CS7: lData = LCR_BITS_7; mask = 0x7f; dbg("%s - data bits = 7", __FUNCTION__); break;
default:
- case CS8: lData = LCR_BITS_8; dbg(__FUNCTION__" - data bits = 8"); break;
+ case CS8: lData = LCR_BITS_8; dbg("%s - data bits = 8", __FUNCTION__); break;
}
lParity = LCR_PAR_NONE;
if (cflag & PARENB) {
if (cflag & PARODD) {
lParity = LCR_PAR_ODD;
- dbg(__FUNCTION__" - parity = odd");
+ dbg("%s - parity = odd", __FUNCTION__);
} else {
lParity = LCR_PAR_EVEN;
- dbg(__FUNCTION__" - parity = even");
+ dbg("%s - parity = even", __FUNCTION__);
}
} else {
- dbg(__FUNCTION__" - parity = none");
+ dbg("%s - parity = none", __FUNCTION__);
}
if (cflag & CSTOPB) {
lStop = LCR_STOP_2;
- dbg(__FUNCTION__" - stop bits = 2");
+ dbg("%s - stop bits = 2", __FUNCTION__);
} else {
lStop = LCR_STOP_1;
- dbg(__FUNCTION__" - stop bits = 1");
+ dbg("%s - stop bits = 1", __FUNCTION__);
}
/* figure out the flow control settings */
if (cflag & CRTSCTS) {
rxFlow |= IOSP_RX_FLOW_RTS;
txFlow |= IOSP_TX_FLOW_CTS;
- dbg(__FUNCTION__" - RTS/CTS is enabled");
+ dbg("%s - RTS/CTS is enabled", __FUNCTION__);
} else {
- dbg(__FUNCTION__" - RTS/CTS is disabled");
+ dbg("%s - RTS/CTS is disabled", __FUNCTION__);
}
/* if we are implementing XON/XOFF, set the start and stop character in the device */
/* if we are implementing INBOUND XON/XOFF */
if (I_IXOFF(tty)) {
rxFlow |= IOSP_RX_FLOW_XON_XOFF;
- dbg(__FUNCTION__" - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", start_char, stop_char);
+ dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __FUNCTION__, start_char, stop_char);
} else {
- dbg(__FUNCTION__" - INBOUND XON/XOFF is disabled");
+ dbg("%s - INBOUND XON/XOFF is disabled", __FUNCTION__);
}
/* if we are implementing OUTBOUND XON/XOFF */
if (I_IXON(tty)) {
txFlow |= IOSP_TX_FLOW_XON_XOFF;
- dbg(__FUNCTION__" - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", start_char, stop_char);
+ dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", __FUNCTION__, start_char, stop_char);
} else {
- dbg(__FUNCTION__" - OUTBOUND XON/XOFF is disabled");
+ dbg("%s - OUTBOUND XON/XOFF is disabled", __FUNCTION__);
}
}
baud = 9600;
}
- dbg(__FUNCTION__ " - baud rate = %d", baud);
+ dbg("%s - baud rate = %d", __FUNCTION__, baud);
status = send_cmd_write_baud_rate (edge_port, baud);
return;
/* create our private serial structure */
edge_serial = kmalloc (sizeof(struct edgeport_serial), GFP_KERNEL);
if (edge_serial == NULL) {
- err(__FUNCTION__" - Out of memory");
+ err("%s - Out of memory", __FUNCTION__);
return -ENOMEM;
}
memset (edge_serial, 0, sizeof(struct edgeport_serial));
/* set the number of ports from the manufacturing description */
/* serial->num_ports = serial->product_info.NumPorts; */
if (edge_serial->product_info.NumPorts != serial->num_ports) {
- warn(__FUNCTION__ " - Device Reported %d serial ports vs core "
+ warn("%s - Device Reported %d serial ports vs core "
"thinking we have %d ports, email greg@kroah.com this info.",
- edge_serial->product_info.NumPorts, serial->num_ports);
+ __FUNCTION__, edge_serial->product_info.NumPorts,
+ serial->num_ports);
}
- dbg(__FUNCTION__ " - time 1 %ld", jiffies);
+ dbg("%s - time 1 %ld", __FUNCTION__, jiffies);
/* now load the application firmware into this device */
load_application_firmware (edge_serial);
- dbg(__FUNCTION__ " - time 2 %ld", jiffies);
+ dbg("%s - time 2 %ld", __FUNCTION__, jiffies);
/* Check current Edgeport EEPROM and update if necessary */
update_edgeport_E2PROM (edge_serial);
- dbg(__FUNCTION__ " - time 3 %ld", jiffies);
+ dbg("%s - time 3 %ld", __FUNCTION__, jiffies);
/* set the configuration to use #1 */
// dbg("set_configuration 1");
for (i = 0; i < serial->num_ports; ++i) {
edge_port = kmalloc (sizeof(struct edgeport_port), GFP_KERNEL);
if (edge_port == NULL) {
- err(__FUNCTION__" - Out of memory");
+ err("%s - Out of memory", __FUNCTION__);
return -ENOMEM;
}
memset (edge_port, 0, sizeof(struct edgeport_port));
{
int i;
- dbg (__FUNCTION__);
+ dbg("%s", __FUNCTION__);
/* stop reads and writes on all ports */
for (i=0; i < serial->num_ports; ++i) {
projects / history.git / commitdiff